• April 13, 2021, 07:59:09 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Unexpected MAC in MAC table in D-Link DGS-1210-10P  (Read 399 times)

Olivia_Iron

  • Level 1 Member
  • *
  • Posts: 2
Unexpected MAC in MAC table in D-Link DGS-1210-10P
« on: February 17, 2021, 11:56:27 AM »

Hi!

I used 2 switches D-Link DGS-1210-10P.
I noted down their MAC addresses displayed in web interface under Device information section. They were b8-a3-86-XX-YY-ZZ alike.
I changed the IP of the switches to match my LAN scope.
I connected the 2 switches and test some ping between PCs across the two switches. Everything worked fine, but the Dynamic Forwarding Table showed MACs that didn't  belong to any of the switches nor the PCs involved in pings.

In fact one of the MAC was cc-b2-55-II-JJ-KK. I think it does not make any sense, but it happened!
Could anybody shed some light on this issue?

Thank you very much for your help.

I can't explain why, but I assure you it happened.

Logged

Olivia_Iron

  • Level 1 Member
  • *
  • Posts: 2
Re: Unexpected MAC in MAC table in D-Link DGS-1210-10P
« Reply #1 on: March 02, 2021, 04:38:23 AM »

I have to correct my previous post. The unidentified MAC does not have a different beginning, only a different end.

Ok, I have found a pattern:

In the dynamic forwarding table there are two entries for the same switch:
  • One matching the other switch mac and
  • A second one with corresponding the other switch mac plus the port number through which the switch is connected

Does it make sense?
Logged