• September 18, 2019, 01:10:31 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: D-Link DAP 2660 frequent restart  (Read 742 times)

Abdul Hai

  • Level 1 Member
  • *
  • Posts: 2
D-Link DAP 2660 frequent restart
« on: April 29, 2019, 03:08:53 AM »

Hi,

I've D-Link DAP 2660 2 No's in all our branch offices which are restarting very frequently. This has started from last one month. Can anyone suggest me & what could be the reason.

I have updated the devices with latest firmware(1.15) & done reset to factory settings, but still facing the same issue.

Given static ip address to all devices.

My observation : When ever any user(Windows-10 without latest updates / Android Phone) joins this wifi device then all the users connected to that particular wifi will get disconnected and WIFI SSID will not be displayed for 2-3 min in the wifi list.

Thanks in advance :)

Best Regards,
Abdul Hai
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47755
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: D-Link DAP 2660 frequent restart
« Reply #1 on: April 29, 2019, 06:55:55 AM »

Link>Welcome!

  • What Hardware version is your DAP? Look at the sticker under the DAP.
  • Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
  • What region are you located?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy
  • Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
  • What wireless modes are you using?
  • 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
  • 2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or AC on 5Ghz?
  • Channel Width set for Auto 20/40Mhz or try 20Mhz only.
  • Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
  • What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
  • What wireless devices do you have connected?
  • Ensure any devices with WiFi adapter drivers are updated.
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
  • Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting