• September 19, 2019, 08:43:31 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR-822 GUI cycles in browser  (Read 822 times)

fiddletownrob

  • Level 1 Member
  • *
  • Posts: 3
DIR-822 GUI cycles in browser
« on: July 12, 2018, 03:44:48 PM »

After I access the router via http://dlinkrouter.local/Home.html it initially shows how many connected clients I have...shortly thereafter the count goes down to zero and the GUI recycles to the Admin sign-in screen. Any changes I've made to device names, reserved IP addresses, etc. are lost...I've tried using Chrome, Edge, and older IE...any suggestions?

Current Firmware Version: 1.10
Current Firmware Date: 2018-03-10T17:54:22
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47761
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-822 GUI cycles in browser
« Reply #1 on: July 13, 2018, 11:54:49 AM »

Link>Welcome!



How many devices do you have connected?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

fiddletownrob

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-822 GUI cycles in browser
« Reply #2 on: July 15, 2018, 09:53:39 AM »

Hello,

I'm in California
Factory reset performed after upgrading to latest FW
I have between 17-20 devices connected at a time (cameras, weather station, pads, phone, range extender, printers, home automation hub), I'm not a gamer...
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47761
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-822 GUI cycles in browser
« Reply #3 on: July 15, 2018, 10:51:16 AM »

Was this working before or did you just upgrade the router?

I would try this, disconnect everything from the router accept for 1 wired PC.
Download the v1.10 FW file again to the wired PC.
Do a factory reset.
Using IE11 or FF, go in and re-load the same FW file.
After it loads, factory reset and set up from scratch. I might skip the set up wizard this time. Manually set up the SSID and Name.
Then add a few devices then see how it does...
Let us know if it still happens...
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

fiddletownrob

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-822 GUI cycles in browser
« Reply #4 on: July 16, 2018, 08:28:29 PM »

Thank for getting back to me...this is (was) a new purchase to replace Netgear router the was going out.
I tried you suggestions then call Amazon for a replacement router, it arrived today with similar issues plus new ones:
1) as before, the connected devices count jumps all over then goes down to zero and the GUI recycles to the Admin sign-in screen
2) some of the reserved IP address don't get assigned to the correct device, therefore I can't access my home automation hub for instance
3) WPS fails to connect 3 of my devices, two are in the next room over from the router

My netgear router had none problems so I'm returning the routers to Amazon (once they get their site working again - LOL)

I thank you though for trying to help...
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47761
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-822 GUI cycles in browser
« Reply #5 on: July 17, 2018, 06:29:12 AM »

Wow, the 882 seems to be having issues out there. Strange. I presume a bad batch.

I would suggest giving the DIR-867 or 878 a try:
http://us.dlink.com/products/connect/ac1750-mu-mimo-wi-fi-router/
http://us.dlink.com/products/connect/ac1900-mu-mimo-wi-fi-router/


Sorry your having problems like this.  :-\
« Last Edit: July 17, 2018, 06:36:10 AM by FurryNutz »
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47761
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-822 GUI cycles in browser
« Reply #6 on: July 17, 2018, 08:37:57 AM »

One more thing to try before you send one back, if you have time.
Please downgrade FW to v1.01 using the following procedure:
Emergency Recovery Mode
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting