• November 22, 2019, 06:56:57 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: how to replace hdd  (Read 846 times)

jologsako

  • Level 1 Member
  • *
  • Posts: 2
how to replace hdd
« on: April 08, 2018, 11:20:59 PM »

Hi,

my raid config is standard and installed hdd1: 2tb and hdd2: 1.5tb (this is the one failing)
in system status  - hard drive info - the status of drive is marked as X, also it fails for SMART test, should i replace the drive? if yes how can i do this without loosing files on both hdd?

btw,  hdd2 is my drive for P2P and Volume_2 and my main problem is i cannot copy files in the P2P folder the network drive hangs up. but on the main drive Volume_2 theres no problem copying files

i already download the Ext2IFS_1_12, RStudio8 and nassetup. im also familiar how to recover files using these software. but im not sure if i can keep the data on the hdd1 once i install the new drive

another question is since DNS-320L is limit to 2tb per bay, is there any other way to add a 4tb drive? sorry im not familiar with raid types :)
« Last Edit: April 08, 2018, 11:50:12 PM by jologsako »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47922
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: how to replace hdd
« Reply #1 on: April 09, 2018, 02:42:22 PM »

I would try to copy the files off the 2nd HDD on to a PC that can temporarily hold the data. Once the data is off, then you can remove the failing drive and install another.

I would review this thread for what others have said that works for drive sizes in this model DNS:
http://forums.dlink.com/index.php?topic=51459.0

There is some stating 4Tb drives in use.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

jologsako

  • Level 1 Member
  • *
  • Posts: 2
Re: how to replace hdd
« Reply #2 on: April 09, 2018, 07:37:33 PM »

I would try to copy the files off the 2nd HDD on to a PC that can temporarily hold the data. Once the data is off, then you can remove the failing drive and install another.

I would review this thread for what others have said that works for drive sizes in this model DNS:
http://forums.dlink.com/index.php?topic=51459.0

There is some stating 4Tb drives in use.

thank you :)
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47922
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: how to replace hdd
« Reply #3 on: April 10, 2018, 09:37:41 AM »

 ;)
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting