• June 18, 2018, 06:30:57 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: no model DCS-5030L available in D-ViewCam program used for DCS-932L?  (Read 942 times)

Choppini

  • Level 1 Member
  • *
  • Posts: 4

I have a DCS-932L, it is doing it's job for years now, including the D-ViewCam program. Now I got a used DCS-5030L, everything is working fine, bit I can not add it into the D-ViewCam to manage both of them there. The model# DCS-5030L does not exist. It shows DCS-3710 and the next one is DCS-5220Ax. I know the 5030 came out long after the 932, Device Pack Version 1.3.0 - Is there an update? Anyone can help? Thanks
« Last Edit: February 21, 2018, 11:25:42 AM by Choppini »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 45134
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: no model DCS-5030L available in D-ViewCam program used for DCS-932L?
« Reply #1 on: February 21, 2018, 12:31:18 PM »

Link>Welcome!

  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
  • What region are you located?


What version of DVC are you currently using?

There are upgrades for DVC:
http://forums.dlink.com/index.php?board=156
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Choppini

  • Level 1 Member
  • *
  • Posts: 4
Re: no model DCS-5030L available in D-ViewCam program used for DCS-932L?
« Reply #2 on: February 24, 2018, 11:10:23 AM »

Thanks for your response, F.N.

The H/W version of the DCS-932L is A1, the F/W version (written on the box) is 1.01. 
File version 3.1.1 (D-ViewCam application=product version 3.11-0720) file version 3.1.1.0

H/W version of the used purchased DCS-5030L is also A1. (F/W ver: 1.01, which I don;t have)

I am located in Canada/WestCoast
Any more infos required? I really like the DCS-L5030.
Logged

Choppini

  • Level 1 Member
  • *
  • Posts: 4
Re: no model DCS-5030L available in D-ViewCam program used for DCS-932L?
« Reply #3 on: February 24, 2018, 01:33:49 PM »

I am not sure why, but I was reading through the forum, went through almost all of the "supported camera lists" for most of the newer 'device packs' and I could not find the DCS-5030L... not at all. hm. Guess I have to abandon D-Link, had a look at the iSpy, but it is pretty sluggy. Any other recommendations? Too bad, that d-viewcam is just what I want
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 45134
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: no model DCS-5030L available in D-ViewCam program used for DCS-932L?
« Reply #4 on: February 24, 2018, 04:27:38 PM »

Try the newer version of DVC?
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Choppini

  • Level 1 Member
  • *
  • Posts: 4
Re: no model DCS-5030L available in D-ViewCam program used for DCS-932L?
« Reply #5 on: February 24, 2018, 04:43:47 PM »

well...I tried updating, with different versions..... it goes through, but when I want to start the main console, a message appears that the version is a newer one, first I have to install something like 1.1 or so...
I uninstalled dvc... installed a complete new version, same thing, uninstalled. installed another "older" newer version. Cant get in anymore.
I scraped now again everthing 'newer' of dvc off and installed from the original cd of the DCS-932L again, and I'm in again..... just with the DCS-932. the DCS-5030 won't be recognized.
The 5030 works on ip and on 2 different devices on my-d-link lite (android cell and tablet). I wasted enough time with d-link within the past few days, I'm going to look into other programs. Thanks, I'm done with 'trying'
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 45134
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: no model DCS-5030L available in D-ViewCam program used for DCS-932L?
« Reply #6 on: February 24, 2018, 04:54:49 PM »

Good Luck.  ::)
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting