• October 27, 2020, 08:24:55 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Problem... My cam PTZ donot go to "Home position" after electricity return ?!!!  (Read 4437 times)

akram801

  • Level 1 Member
  • *
  • Posts: 7

hi ...
i have a Dlink ip camera DCS-5222LB
when the electricity cut off and return the camera do not back to its home position that i configured ?
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2192

Where did it return to? 

The cameras home position?

Is it still set? Or did it reset?
Logged

akram801

  • Level 1 Member
  • *
  • Posts: 7

it return to its default physical position not to home position that i configured
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2192

If I remember I'll try to power cycle and see what happens.

Whenever I use the phone app, it always goes back go the default (which I never changed).
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2558

I believe after a reboot/power outage the camera will return to the default position, not what you have set as Home. I will have a tech test (or Ryat3 who will probably be quicker  ;D ) and see if this is the case.

I assume when you go back into the UI or app, you click Home and it positions properly?
Logged

akram801

  • Level 1 Member
  • *
  • Posts: 7

is there is a solution ?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49294
  • D-Link Global Forum Moderator
    • Router Troubleshooting

Any status on this?  ???
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

Datre

  • Level 1 Member
  • *
  • Posts: 4

Hello,
I have firmware 2.16.03 and sometimes the camera does not come back to home position after a programmed automatic reboot.
It happens regularly if I am connected at the same time, but sometimes also in the middle of the night when I am not connected.
Is there a trick ?
Logged

yemiscit

  • Level 1 Member
  • *
  • Posts: 2

I have the same issue with Dcs 8525

I experience a lot of power outsges and camera goes back to its factory location after each outage and i am recording irrelevant part of the room most of the times.

I have two cameras and they both behave the same, latest firmware.

Logged