• November 25, 2020, 03:10:58 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: i need Help with 2750u v2  (Read 1960 times)


  • Level 1 Member
  • *
  • Posts: 1
i need Help with 2750u v2
« on: January 17, 2018, 11:57:32 PM »

Good Day ,

i Have DSL-2750U i updated it to firmware 1.16 and 1.15 and is not stable...so i downgrade again to 1.03 firmware but i found my HW version changed from V2 to V1 is that normal ? because the internet is not stable and it keeps not active but the power is good .and i can not fine 1.03 for HW V2 ..please help if you can send me the stock firmware...the photo attached of firmware before update  ..Thanks!


Best Regards,
Kareem Gaber
« Last Edit: January 18, 2018, 12:01:18 AM by kikinfl2004 »


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49368
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: i need Help with 2750u v2
« Reply #1 on: January 18, 2018, 07:56:42 AM »


  • What region are you located?

Has a factory reset been performed and set up from scratch?

I recommend that you have your ISP check the cabling going to the ISP modem, check signal levels going to the ISP modem. For DSL or Fiber service lines, ensure that the ISP is using good working phone or cable lines to the DSL modem and that the phone lines are filtered correctly. For cable Internet, RG-6 coaxial cable is needed, not RG-59. Check for t.v. line splitters and remove them as they can introduce noise on the line and lower the signal going to the ISP modem. I recommend having the ISP service physically check the lines going from the out side to the ISP modem. Connecting to the ISP modem could result in a false positive as the signal to the modem could be just enough to that point then adding on a router, could see problems. The router operation is dependent upon getting good data flow from the ISP modem and the modem is dependent upon getting good signal from the ISP Service.

Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.