• October 20, 2020, 03:08:10 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DAP-2610 RSSI Percentage Values Explained for Aging and ACL values  (Read 4241 times)


  • Level 1 Member
  • *
  • Posts: 12

Apologies if this is posted elsewhere but I cannot find it and the AP documentation does not explain it.

I just want to understand how the DLink RSSI percentage values relate to real db values.  The reason for the question is that I am trying to tune the RSSI Aging out and ACL values so one AP does not hang on to the mobile devices longer than it should before handing to another. I am basing my numbers on the following assumptions:

db >= -50 db = 100% quality
db <= -100 db = 0% quality

For RSSI signal between -50db and -100db,
quality ~= 2* (db + 100)
RSSI ~= (percentage / 2) - 100

For example:
High quality: 90% ~= -55db
Medium quality: 50% ~= -75db
Low quality: 30% ~= -85db
Unusable quality: 8% ~= -96db

As this is a residential installation I have the transmit power turned down to 25% for 5GHz and 12.5% for 2.4GHz on all the AP's.

Thanks for any advice.


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49273
  • D-Link Global Forum Moderator
    • Router Troubleshooting
« Last Edit: January 17, 2018, 09:44:04 AM by FurryNutz »
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!