D-Link Wireless For Business > DAP-2695

Wireless speed

(1/1)

martijnk:
Hey guys,

I have a DAP-2695, nice machine but I can't get my Wireless speed above 120 mbps. Even when I have my laptop or phone close to the AP it's always max 120 mbps. Cabled I can get 240 mbps and with a cheaper Netgear router I get this wireless as well.

Any idea what I can do to fix this? Btw before you ask I checked and the AP is negotiating on 1 gbps with the switch. I also have the latest firmware.

FurryNutz:
Link>Welcome!


* What Hardware version is your DAP? Look at the sticker under the DAP.
* Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
* What region are you located?
What connection rates are you seeing between the DAP and your wireless devices?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy

* Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
* What wireless modes are you using?
* 2.4Ghz  only: Try single mode G or N or mixed G and N?
* 2.4Ghz and 5Ghz: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or AC on 5Ghz?
* Channel Width set for Auto 20/40Mhz or try 40Mhz only.
* Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
* What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
* What wireless devices do you have connected?
* Ensure any devices with WiFi adapter drivers are updated.
* Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
* Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?
* If you have any of these options, Try turning OFF or ON Short GI, WLAN Partition, Extra Wireless Protection and HT 20/40 Co-existence if you have it. Also testing with HT20/40Mhz Co-existence enabled will impact results as well. I prefer to use this option OFF. Recommended settings are default. Under Advanced/Advanced Wireless.
* Disable WPS Under Advanced/Advanced Wireless or Wireless settings.
* Enable WMM Enable Under Advanced/Advanced Wireless.

Navigation

[0] Message Index

Go to full version