• October 21, 2019, 10:40:56 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: How To Setup Port Forwarding on Firmware 3.11 WAN to LAN device or server  (Read 5335 times)

landru

  • Level 1 Member
  • *
  • Posts: 1

Have experience with many firewall, routers. Here is a HOW TO for quick port forwarding:

1. Create a new custom service...
Main Menu > Security > Custom Service > Add a New Custom Service

2. Give it a name, select the link type (TCP, UDP, BOTH (TCP+UDP), or others
3. Select Multiple Ports. LEAVE SOURCE PORTS BLANK.
4. Enter the source WAN port numbers separated by a comma if using multiple ports into the DESTINATION PORTS
5. Click SAVE
7. Create a new firewall rule
Main Menu > Security > Firewall Rules > Add New IPv4 Firewall Rule
8. From Zone  - Insecure WAN
9. To Zone - Secure LAN
10. Service (select the name of your created custom service)
11. Change Action to Always Allow
12. Source = ANY
13. Log = Never
14. Internal IP Address = (IP address of server/pc/device you are trying to forward to)
15. Click SAVE

DONE - Quick and Dirty


« Last Edit: January 11, 2019, 07:00:15 AM by GreenBay42 »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47844
  • D-Link Global Forum Moderator
    • Router Troubleshooting

Link>Welcome!

Thank for this information, hope it helps future users.  ;)
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

fronquillo1975

  • Level 1 Member
  • *
  • Posts: 1

Have experience with many firewall, routers. Here is a HOW TO for quick port forwarding:

1. Create a new custom service...
Main Menu > Security > Custom Service > Add a New Custom Service

2. Give it a name, select the link type (TCP, UDP, BOTH (TCP+UDP), or others
3. Leave Source Start Port and Source Finish Port BLANK
4. Enter the port number(s) or port ranges into the Destination Start Port and Destination Finish Port fields
5. Click SAVE
7. Create a new firewall rule
Main Menu > Security > Firewall Rules > Add New IPv4 Firewall Rule
8. From Zone  - Insecure WAN
9. To Zone - Secure LAN
10. Service (select the name of your created custom service)
11. Change Action to Always Allow
12. Source = ANY
13. Log = Never
14. Internal IP Address = (IP address of server/pc/device you are trying to forward to)
15. Click SAVE

DONE - Quick and Dirty
Excellent information!!!! Very useful for me at this time!!!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47844
  • D-Link Global Forum Moderator
    • Router Troubleshooting

Glad it works for you. Thanks for your feed back. Please feel free to post again.

Enjoy.

Have experience with many firewall, routers. Here is a HOW TO for quick port forwarding:

1. Create a new custom service...
Main Menu > Security > Custom Service > Add a New Custom Service

2. Give it a name, select the link type (TCP, UDP, BOTH (TCP+UDP), or others
3. Leave Source Start Port and Source Finish Port BLANK
4. Enter the port number(s) or port ranges into the Destination Start Port and Destination Finish Port fields
5. Click SAVE
7. Create a new firewall rule
Main Menu > Security > Firewall Rules > Add New IPv4 Firewall Rule
8. From Zone  - Insecure WAN
9. To Zone - Secure LAN
10. Service (select the name of your created custom service)
11. Change Action to Always Allow
12. Source = ANY
13. Log = Never
14. Internal IP Address = (IP address of server/pc/device you are trying to forward to)
15. Click SAVE

DONE - Quick and Dirty
Excellent information!!!! Very useful for me at this time!!!
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

biroplast

  • Level 1 Member
  • *
  • Posts: 2

this does not work for three different computers with different ports.

How is the setup for a three computers and thre different ports.

1.pc port 4xxx
2.pc port 1xxx
3.pc port 2xxx

Help please
Logged

johnjces

  • Level 1 Member
  • *
  • Posts: 3

In firmware 3.11_WW dated 10/15/18, the following cannot be done:

3. Leave Source Start Port and Source Finish Port BLANK

If you try and save the service it won't let you until you fill it in.

SO... does not appear to work in 2019.

John
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47844
  • D-Link Global Forum Moderator
    • Router Troubleshooting

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information
We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting