• December 07, 2019, 01:16:08 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS-5300G - "...transmission changed to http" message on login  (Read 6620 times)

Flakestar

  • Level 1 Member
  • *
  • Posts: 1

I solved the problem of the 'because the connection problem of network environment, transmission protocol changed to http'.  I saw many postings with this message with no solution.  Here is the solution.

If you have your configuration set up as follows: Home - Configuration - Audio/Video - Mute
you get the above message and the picture that is displayed is HTTP_V (black bar at top of picture)
When you disable the mute, you don't get the above message and the picture that is displayed is UDP_AV.  This is all from the internal workstation.  Externally you see V_ONLY.  This is from a windows 7 workstation which I never see anything other than V_ONLY.  This may be a configuration problem which I have not pursued.

If you have your configuration set as follows: Home-Connection Type-Disable Sound
you get V_ONLY on the internal workstation (Vista) and V_only on the external workstation(Win 7).

I suspect there is something on the Win 7 configuration because I tested the camera from home (XP) and it worked properly, i.e. UDP_AV (external).
Logged

onexjoe

  • Level 1 Member
  • *
  • Posts: 1
Re: DCS-5300G - "...transmission changed to http" message on login
« Reply #1 on: November 04, 2019, 05:26:52 AM »

Thank you very much. This worked perfectly. I was ready to replace this camera thinking it was bricked after i updated the firmware. Thanks again!!!
Logged