• February 28, 2021, 05:32:29 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Camera Network  (Read 1545 times)


  • Level 1 Member
  • *
  • Posts: 1
Camera Network
« on: May 09, 2017, 01:13:39 PM »

I have 3 cameras.  I have 2 cameras  on one SSID wifi network router with the Ethernet connected DNR-202L and one camera on another SSID network.  My wifi networks all use the same cable modem.  question is: How can I get all three cameras recording in the DNR-202L.   It almost looks like the cameras must be on the same router as the DNR-202L?


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49524
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Camera Network
« Reply #1 on: May 09, 2017, 01:38:28 PM »


  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
  • What region are you located?

What Mfr and model is the main host router?
Make sure call cameras are using a wireless network that allows communication with in the entire network or would need to make sure all cameras are on the same network/subnet as the DNR.
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.


  • Level 10 Member
  • *****
  • Posts: 2233
Re: Camera Network
« Reply #2 on: May 09, 2017, 02:01:37 PM »

You have to connect the routers together.
Main one might be off of your cable modem.
The next router works be and off of your first router.

The Dnr needs connected to router 2.  You should be able to see everything at the Dnr using 192.168.1.xxx and 192.168.2.xxx.