Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Firmware:   v1.10 B01   01/25/2017   NA Region!
Revision Info:
Problems Fixed:
1.   Wireless - AP Mode - fixed beacon broadcast issue when turn off AP mode.
Do a Factory reset and set up from scratch after FW has been loaded.

New Features:
1. mydlink agent upgrade to 2.1.0-b45.
2. Added UID support

D-Link posted DCS-935L Rev A firmware version v1.10 Build 01, which can be downloaded here: DCS-935L - Firmware v1.10.01 Download.

NOTE: Be sure that your wireless signal on the main host router is good and signal is strong with the camera if it's connected wirelessly. If your confident in this, upgrade via wireless with the camera can proceed. If your not confident in the wireless signal, use a wired LAN cable connection to the camera before upgrading the camera. This would help avoid any wireless FW upgrade problems.

• Network Cameras - Important Posts & Information
  
• Network Cameras - Beta Firmware Terms and Conditions
  
• Network Cameras - Why Have Multiple Hardware Versions for the Same Model?
  
  

Please post your comments and observations as a reply to this thread.

    

[Red90]

Failed update.  Such a pain with these cameras because you then have to reset them and reprogram from scratch.

[FurryNutz]

What browser are you using to update the FW? I recommend using IE11 or FF only and be sure to clear all browser caches before and after sending the FW file.
Also temporarily disable any PC security software while upgrading FW.

I think there is a save camera configuration to file that you can do then re-load after FW is updated...

[Red90]

I did it from the app.  The problem with these being wireless only is once they die, there is no way to communicate.  You have to reset them and the only way to set them up is by direct connecting with a smartphone.  It is a very painful design.

[FurryNutz]

So were you able to get it updated or is the camera not working at all now?

[Red90]

Nope.  Seems to be bricked.  The hard reset does not work.  No way to connect to the camera.

[Red90]

Finally got it setup with a weird array of reset and reboots before the ad-hoc came to life and worked.  It came up with the new firmware installed.  Somehow the new firmware is preventing a hard reset back to original firmware, which is really scary.

[RYAT3]

I did it from the app.  The problem with these being wireless only is once they die, there is no way to communicate.  You have to reset them and the only way to set them up is by direct connecting with a smartphone.  It is a very painful design.

Or a laptop... Or a wireless device for your PC...

[FurryNutz]

Resets don't revert back to any prior version of FW. FW should be updated and kept up to date to maintain security and connection with the mydlink services.

Finally got it setup with a weird array of reset and reboots before the ad-hoc came to life and worked.  It came up with the new firmware installed.  Somehow the new firmware is preventing a hard reset back to original firmware, which is really scary.

[Red90]

Resets don't revert back to any prior version of FW. FW should be updated and kept up to date to maintain security and connection with the mydlink services.

  Hard resets have always reverted to the original firmware in the past.

[FurryNutz]

  It shouldn't, factory reset should only clear camera configurations...

[ejunky]

http://forums.dlink.com/index.php?topic=65474.msg278743#msg278743
SSID still visible on my side after updating several cameras.

***update****
Resetting to factory appears the only way to implement this fix.  After doing this procedure the ssids are no longer visible.

[FurryNutz]

Yes a factory reset is needed to ensure the previous FW and settings have been cleared out.

Glad the issue is resolved now.

Enjoy. 

[Red90]

Anyone else having trouble after this firmware?  It is losing the network daily on mine.  Now it won't connect at all and when put in ad-hoc mode, it does not broadcast an SSID, so there is no way to connect and fix.  Painful.

[FurryNutz]

Was a factory reset performed after the FW was updated? One should be as it seemed to fix this users issues after upgrading.