• October 21, 2018, 06:24:45 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: URL Command List  (Read 4178 times)

Don

  • Level 1 Member
  • *
  • Posts: 3
URL Command List
« on: July 11, 2015, 08:53:29 PM »

Hi:

I just got two DCS-934Ls and I'm trying to pass the username and password. The command list at http://forums.dlink.com/index.php?topic=59172.0 doesn;t list this camera. I have tried http://[IPADDRESS]/aview.htm?user=[USERNAME]&password={PASSWORD] but the web page still asks for login info.

Also I have tried looking at these cameras via crome but I only get a still image, not motion. In IE, I had to load a extention for it to show motion. Any way to do the same in crome?

Thanks for your time.

Don Stephens
Logged

Don

  • Level 1 Member
  • *
  • Posts: 3
Re: URL Command List
« Reply #1 on: September 29, 2015, 03:40:48 PM »

Bump...
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2110
Re: URL Command List
« Reply #2 on: September 30, 2015, 11:49:18 AM »

What about http://username:password/...
Logged

cmontyburns

  • Level 3 Member
  • ***
  • Posts: 194
Re: URL Command List
« Reply #3 on: September 30, 2015, 10:05:52 PM »

I just got two DCS-934Ls and I'm trying to pass the username and password. The command list at http://forums.dlink.com/index.php?topic=59172.0 doesn;t list this camera. I have tried http://[IPADDRESS]/aview.htm?user=[USERNAME]&password={PASSWORD] but the web page still asks for login info.



I don't have one of these cameras so unfortunately I can't be of direct help.  But a couple of questions/comments come to mind:

1. What are you trying to do?  Just look at the video without bringing up the entire camera web interface?
2.  Where did you get the URL string that you are testing with?
3.  Assuming the camera does allow you to pass the credentials in via a URL, it does seem like your syntax is wrong.  Most likely it's just ignoring everything after the ? and is not even trying to process the credentials you are passing in. 
Logged

robert-e

  • Level 2 Member
  • **
  • Posts: 75
Re: URL Command List
« Reply #4 on: September 30, 2015, 10:51:17 PM »

FurryNutz asked me to comment:  Unfortunatly, I am only using a dynamic dns service and port forwarding on the router to the camera; not the mydlink service.  The camera replies with a login page requesting the camera's user name and password.  I supply those (using linux and firefox), and it shows the camera image.  It is not a video, but rather a still image.  This is sufficient for my needs, since it is only to monitor the temperature of the plenum on my furnace.  I have wondered if I enabled java, if the camera would stream video, but to tell the truth, I have been too lazy to work this out.  I suppose it would involve opening more ports on the router firewall, as a first consideration.

Sorry I can't be of more help.

Regards,
Bob
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 46019
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: URL Command List
« Reply #5 on: October 01, 2015, 07:13:33 AM »

Thank you fellas.  ;D
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

Don

  • Level 1 Member
  • *
  • Posts: 3
Re: URL Command List
« Reply #6 on: November 17, 2015, 01:50:15 PM »

FurryNutz asked me to comment:  Unfortunatly, I am only using a dynamic dns service and port forwarding on the router to the camera; not the mydlink service.  The camera replies with a login page requesting the camera's user name and password.  I supply those (using linux and firefox), and it shows the camera image.  It is not a video, but rather a still image.  This is sufficient for my needs, since it is only to monitor the temperature of the plenum on my furnace.  I have wondered if I enabled java, if the camera would stream video, but to tell the truth, I have been too lazy to work this out.  I suppose it would involve opening more ports on the router firewall, as a first consideration.

Sorry I can't be of more help.

Regards,
Bob
Just realized this board doesn't notify when there is a response. My bad.
I'm trying to embed an image from the camera by the way of an iframe. I'd love to see movement without refreshing the page.

Thanks.

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 46019
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: URL Command List
« Reply #7 on: November 17, 2015, 06:48:21 PM »

You can enable notifications if needed from this thread.
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!