• November 21, 2019, 03:37:21 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Turn on/off motion detection via URL/HTTP  (Read 5975 times)

JohanK

  • Level 1 Member
  • *
  • Posts: 2
Turn on/off motion detection via URL/HTTP
« on: May 14, 2015, 08:00:26 AM »

Hi,

I'm trying to figure out how to turn on and off (enable/disable) the motion detection through a http-request command.

I want to integrate a few DCL-930L with my home automation system (Fibaro) but only want the cameras to be on when the alarm is turned on. There is a plugin for this camera in Fibaro Home Center but unfortunately you can't really do much with this plugin when it comes to settings. From what I've figured (and found on this forum) there are several commands you can send via an url but I haven't been able to find any that will work for me.

Any help appreciated,

J
Logged

JohanK

  • Level 1 Member
  • *
  • Posts: 2
Re: Turn on/off motion detection via URL/HTTP
« Reply #1 on: May 14, 2015, 08:49:11 AM »

It's rather funny, but once I've posted the message I gave up...and then it just came to me:

http://192.168.1.xxx/motion.cgi?MotionDetectionEnable=0&ConfigReboot=No&user=admin&pwd=BErtIL1BOo2

Works perfect so figured I should share it, maybe it could be useful for someone else.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47921
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Turn on/off motion detection via URL/HTTP
« Reply #2 on: May 14, 2015, 10:08:21 AM »

Thank you for the information and feed back. We hope it helps all future users who need it.

Enjoy.  ;)
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

mrdall

  • Level 1 Member
  • *
  • Posts: 1
Re: Turn on/off motion detection via URL/HTTP
« Reply #3 on: July 07, 2016, 11:42:19 AM »

It's rather funny, but once I've posted the message I gave up...and then it just came to me:

http://192.168.1.xxx/motion.cgi?MotionDetectionEnable=0&ConfigReboot=No&user=admin&pwd=BErtIL1BOo2

Works perfect so figured I should share it, maybe it could be useful for someone else.

Hi I am new to Fibaro HC2 but I am trying to do the same as you have don.
But I can't get it to work :-(
how do you post the URL request from HC2?
Do you use at virtuel device?
Can you please help me out?

Best regards Morten
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47921
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Turn on/off motion detection via URL/HTTP
« Reply #4 on: July 07, 2016, 12:15:16 PM »

Link>Welcome!

  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
  • What region are you located?

What is Fibaro HC2?  ???

It's rather funny, but once I've posted the message I gave up...and then it just came to me:

http://192.168.1.xxx/motion.cgi?MotionDetectionEnable=0&ConfigReboot=No&user=admin&pwd=BErtIL1BOo2

Works perfect so figured I should share it, maybe it could be useful for someone else.

Hi I am new to Fibaro HC2 but I am trying to do the same as you have don.
But I can't get it to work :-(
how do you post the URL request from HC2?
Do you use at virtuel device?
Can you please help me out?

Best regards Morten
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting