• October 19, 2019, 05:08:17 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR 850L - REMOTE CONFIGURATION  (Read 3442 times)

rodsacchi

  • Level 1 Member
  • *
  • Posts: 4
DIR 850L - REMOTE CONFIGURATION
« on: March 23, 2015, 03:36:49 PM »

I configured my router to be configured over WAN but I can't access remotly.

Also I configured Virtual Servers and Port Forwarding to access my FTP Server but didn't work.

When I'm connected to my internal LAN, the Port Forwarding and WAN Acces works well but over Internet i can't do anything....

It seems the router is blocking packages from Internet.

Can someone helps me?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47844
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 850L - REMOTE CONFIGURATION
« Reply #1 on: March 23, 2015, 06:08:30 PM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?
  • Are you wired or wireless connected to the router?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

rodsacchi

  • Level 1 Member
  • *
  • Posts: 4
Re: DIR 850L - REMOTE CONFIGURATION
« Reply #2 on: March 24, 2015, 09:08:55 AM »

Version A
Firmware 1.10
Brazil
Wirelles Connected

DSL PPoe - Vivo Fiber
BC-ONT1B
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47844
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 850L - REMOTE CONFIGURATION
« Reply #3 on: March 24, 2015, 09:32:14 AM »

Are you getting a public or a private IP address on the WAN side of the router? To tell, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, this is a private IP address...You need a public IP address.

Be sure to have the remote access feature enabled under Tools/Admin. No Port Forwarding or FTP will be needed.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

rodsacchi

  • Level 1 Member
  • *
  • Posts: 4
Re: DIR 850L - REMOTE CONFIGURATION
« Reply #4 on: March 24, 2015, 04:58:43 PM »

At this moment my  Wan IP is 191.205.117.50

And all remote configurations are enable. But still can't access over internet.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47844
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 850L - REMOTE CONFIGURATION
« Reply #5 on: March 24, 2015, 05:45:39 PM »

Depending if you enabled Secure services or not, if your at a remote location, all you need to do is to type in the url address to the WAN IP address and the port number that is listed in the Remote access feature:
http://191.205.117.50:#### port number after (:)

If you enabled Secure Server then do the following:
https://191.205.117.50:#### port number after (:) Port number will change if you enabled secure server.
Port number will be listed in the remote management web page.

Not sure if that WAN IP address is a private or public IP address, maybe private. If so, this still wont work until you get a public IP address on the 850L routers WAN side...##.##.###.###
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

rodsacchi

  • Level 1 Member
  • *
  • Posts: 4
Re: DIR 850L - REMOTE CONFIGURATION
« Reply #6 on: March 25, 2015, 05:18:52 AM »

Tried everything that I could but still not working... I can ping my WAN IP but I just can connect inside the LAN.

So...

I'll try update and restore to factory settings...
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47844
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 850L - REMOTE CONFIGURATION
« Reply #7 on: March 25, 2015, 07:06:39 AM »

Please follow the FW update process.

I would recommend checking with your ISP services to see if your WAN IP address is a private or public address. If it's public then it should work...

Let us know how it turns out.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting