• November 19, 2019, 10:56:17 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Video Stream Lost Error  (Read 23108 times)

sdhruva

  • Level 1 Member
  • *
  • Posts: 3
Video Stream Lost Error
« on: February 03, 2015, 05:55:49 PM »

Hello, I started getting error "Video Stream Lost. The video stream from your device was lost. Please try again. Error 0.70_1_5_5_4B0)" This error appears when I check my cameras DCS-5010L when I am connected through my WiFi. Everything is normal when I don't use WiFi. My router is DIR-880L. There have not been any changes on router side. I am little puzzled because only time it doesn't work is when I am connected to WiFi and not otherwise. So I am guessing somehow the router is blocking it??!! But then no configuration changes in months. I am clueless....can anyone help?
Logged

FurryNutz

  • Poweruser

  • ▲▲
  • *****
  • Posts: 47914
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Video Stream Lost Error
« Reply #1 on: February 04, 2015, 08:41:47 AM »

Link>Welcome!

  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?
  • What ISP Modem service link speeds UP and Down do you have?

Are the cameras local to your location or remotely located?
What application are you suing when this error appears?

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.
  • Turn OFF DNS Relay  under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench and input new DNS addresses under Setup/Internet/Manual.
  • Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
  • Ensure devices are set to auto obtain an IP address.

b]Wireless Configurations[/b]
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy
  • Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
  • What wireless modes are you using?
  • 2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or AC on 5Ghz?
  • Channel Width set for Auto 20/40Mhz or try 20Mhz only.
  • Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
  • What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
  • What wireless devices do you have connected?
  • Ensure any devices with WiFi adapter drivers are updated.
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
  • Any other WiFi routers in the area that maybe causing interferences? Link> Use InSSIDer to find out. How many? Use v3, its free.

Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials



Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

benny_0418

  • Level 1 Member
  • *
  • Posts: 1
Re: Video Stream Lost Error
« Reply #2 on: February 08, 2015, 06:55:33 AM »

Same problem here!  This is not a router or ISP issue.  This is an issue with Dlink.  I have a 932 experiencing no issues but the 933 is.  No router changes and ISP is not blocking anything.  Would appreciate a fix!!  There is obviously a problem as dlink had me revert my firmware back to prior version only to jump back to the latest one. App is virtually useless using iphone and even connecting locally is timing out.  Have made no configuration changes and I am not going run around moving routers and changing channels when the only issue is a DLink cam that has worked fine up until a week ago.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Video Stream Lost Error
« Reply #3 on: February 09, 2015, 11:04:34 AM »

I started having the same problem right after the camera firmware update????   

Clink need help, this is not a router problem!!!!

I split off your topic into a new thread: DCS-5020L - Video Stream Lost Error
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

sdhruva

  • Level 1 Member
  • *
  • Posts: 3
Re: Video Stream Lost Error
« Reply #4 on: February 15, 2015, 02:57:40 PM »

The error went away after I rebooted my camera (DCS-5010L)!!! It was weird though.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Video Stream Lost Error
« Reply #5 on: February 15, 2015, 08:06:14 PM »

I'm glad everything worked itself out.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

bohicaIL

  • Level 1 Member
  • *
  • Posts: 1
Re: Video Stream Lost Error
« Reply #6 on: March 01, 2015, 03:49:02 PM »

My results were identical to Benny_0418.  I have a DCs-932L that works fine, and a DCS-933L that used to but quit with this error message.  My firmware had been updated to 1.07B something in February 2015.   I went to Dlinks support page for this camera, and surprisingly the latest firmware listed for the DCS-933L was 1.04 from 2014.   So I downgraded to this version, and my streaming works again from the iPhone app.   I then tried upgrading to 1.07Bsomething again, and again my video streaming was broken.   Sooo, back to 1.04, and all is well.

Below is Benny_0418 post:

Re: Video Stream Lost Error
Reply #2 on: February 08, 2015, 06:55:33 AM
ReplyQuote
Same problem here!  This is not a router or ISP issue.  This is an issue with Dlink.  I have a 932 experiencing no issues but the 933 is.  No router changes and ISP is not blocking anything.  Would appreciate a fix!!  There is obviously a problem as dlink had me revert my firmware back to prior version only to jump back to the latest one. App is virtually useless using iphone and even connecting locally is timing out.  Have made no configuration changes and I am not going run around moving routers and changing channels when the only issue is a DLink cam that has worked fine up until a week ago.
Logged

Fyrewerx

  • Level 1 Member
  • *
  • Posts: 8
Re: Video Stream Lost Error
« Reply #7 on: March 18, 2015, 03:52:08 PM »

My four 5010l's were working fine after firmware update earlier this year.  Today, updated the iOS app and now constantly get the Video Stream Lost error (Error 0.70_1_5_5_4B0).  I am able to access the cameras through IP address on the web browser (PC), and through the DNR-202L, but not thru MyDlink via web browser.
How did the iPhone/iPad app and MyDlink website get so screwed up?
Logged

FurryNutz

  • Poweruser

  • ▲▲
  • *****
  • Posts: 47914
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Video Stream Lost Error
« Reply #8 on: March 19, 2015, 06:51:42 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Fyrewerx

  • Level 1 Member
  • *
  • Posts: 8
Re: Video Stream Lost Error
« Reply #9 on: April 03, 2015, 12:17:54 PM »

UPDATE:  Ended up re-applying Firmware ver. dcs5010L_v1.06.01  (fourth time) to each camera, wirelessly, while they were mounted in their normal positions.  This immediately allowed the iOS MyD-Link Lite app to work.  After approx. 4 hours following the FW updates, all cameras began working properly via the MyDlink website.
Logged

FurryNutz

  • Poweruser

  • ▲▲
  • *****
  • Posts: 47914
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Video Stream Lost Error (RESOLVED)
« Reply #10 on: April 03, 2015, 12:30:04 PM »

Glad you got it working.

FYI:
Link>DCS Cloud (L) Series Camera Configuration and Mydlink.com

Enjoy.  ;)
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting