D-Link Connected Home > DCH-S150

DCH-S150 PIN incorrect

(1/1)

bfg1974:
I had the device working at home to test. I want to move to motion sensor to a new location which is a different network. I reset the device and while trying to add the new device it is asking for the PIN. I took a picture of the old device page and it matches what is on the device label. But i get "PIN code incorrect"
I can access the device by going to the IP Address 192.168.1.xxx but I don't know that Admin password (i think it was the PIN before)

Would a reset change the PIN ?

bfg1974:
this is fixed - it was me. as i was filling out the info for customer service and getting details off the unit i saw i was using the wrong number for the PIN. I'm going with being tired after driving for 20+ hours.

FYI - the PIN is also the password when you http to the device.

Firmware External Version: V1.04
Firmware Internal Version: V1.04b05
Date: Wed, 22 Oct 2014
Checksum: 0x06296F66
2.4GHz regulation domain: US/NA
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Firmware Query: http://wrpd.dlink.com/router/firmware/query.aspx?model=DCH-S150_Ax_Default_FW_0104_7062B8938F3D
LAN MAC: 70:62:B8:93:8F:3D
Kernel: 2.6.31, B0024, Date=Wed, 17 Sep, 2014
Apps: 1.1, B0017, Date=Wed, 22 Oct, 2014
WLAN Driver: AR9531, 10.1.478, B0006, Date=Thu, 18 Sep, 2014
2.4GHz WLAN MAC 0: 70:62:B8:93:8F:3D
2.4GHz SSID: DCH-S150-8F3D
Factory Default: 0

FurryNutz:
Glad you got it fixed. Enjoy.  ;)

Navigation

[0] Message Index

Go to full version