• October 13, 2019, 08:46:42 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Create a secure subnet on DAP-1320  (Read 2709 times)


  • Level 1 Member
  • *
  • Posts: 1
Create a secure subnet on DAP-1320
« on: July 12, 2014, 10:31:42 PM »

I rent out my basement suite and I provide internet access to the tenants.  My goal is to create a secure subnet (or at least reasonably secure) so that my tenants are on a sub-network and cannot see the parent network.  And vice versa.

I purchased the DAP-1320 thinking that this would happen for free when I create a new SSID for the DAP-1320.  However, when I am connected to the parent network, I can still see the tenants machines on the sub-network and they can see mine on the parent network. I was expecting that I would not be able to see anything from the child network and vice versa.

Is there a way to do this?

I'm not entirely sure if I have the terminology correct, so I apologize if I am not being clear. I can provide more information if you need.


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47833
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Create a secure subnet on DAP-1320
« Reply #1 on: July 14, 2014, 07:41:35 AM »


  • What Hardware version is your DAP? Look at sticker under DAP.
  • Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
  • What region are you located?

I think you'll need to change to use a Wired AP mode on this DAP, then set up the DAPs IP address from the default to

What is your main host router Mfr and model #? Whats it's IP address?
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting