• November 19, 2019, 10:31:18 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: BEEPING NVR-202L  (Read 6550 times)

PEye2000

  • Level 1 Member
  • *
  • Posts: 11
BEEPING NVR-202L
« on: June 23, 2014, 04:51:07 PM »

I have 2 HDD's connect every so offten it will start beeping... WHY???? this happens every few days, I leave it beeping and it will quit beeping.

It just happened and the green light on HDD 2 of the NVR is flashing..

ANY HELP PLEASE..

CAN OR IS THERE SOME PLACE THAT WILL EXPLAIN HOW THE RECORDING SYSTEM WORKS.... STORES... BEEPS FOR WHAT REASON OCATIONLLY...

THANKS JOHN
Logged

DoughBoy

  • Level 1 Member
  • *
  • Posts: 22
Re: BEEPING NVR-202L
« Reply #1 on: June 24, 2014, 10:11:58 PM »

I have 2 HDD's connect every so offten it will start beeping... WHY???? this happens every few days, I leave it beeping and it will quit beeping.

It just happened and the green light on HDD 2 of the NVR is flashing..

ANY HELP PLEASE..

CAN OR IS THERE SOME PLACE THAT WILL EXPLAIN HOW THE RECORDING SYSTEM WORKS.... STORES... BEEPS FOR WHAT REASON OCATIONLLY...

THANKS JOHN


Well, I see that not everyone is jumping to your rescue, maybe because of your "SCREAMING" (upper cases at the end of your post), but I have one of those units also and I have not seen the issue you are having. Nevertheless my curiosity took me to their support site (http://support.dlink.com) and I found the manual. The below link will take you directly to it, so don't believe what I say:

ftp://ftp2.dlink.com/PRODUCTS/DNR-202L/REVA/DNR-202L_MANUAL_1.00_EN.PDF

Looking through the pages I found the following information regarding your question on "beeps":

  • Assembly and Installation -  Attaching External Drives  - PAGE 9
               Step 3 > Note section reads:
           Note: If you do not connect an Ethernet cable, the DNR-202L will beep.

           Step 4 > The NVR will mount the HDD and beep once.
           Note section reads:
           Note: When you want to remove an HDD, press and hold the HDD release button for at least three
           seconds. The NVR will release the HDD and emit a long beep. You can now unplug the USB cable.     


  • Full disclosure of the alarm beeps are under the "LED and Alarm Overview" - PAGE 62



I really hope this helps you!  Enjoy!
 
Logged

Doctor Doom

  • Level 3 Member
  • ***
  • Posts: 127
Re: BEEPING NVR-202L
« Reply #2 on: June 26, 2014, 12:42:57 PM »

The NVR also has logging functionality so you could always check the logs the times it beeps. It might also help.
Logged