• October 23, 2017, 10:06:00 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DNR-322L Manual Record : "Enabled"  (Read 5662 times)

Sgleong

  • Level 1 Member
  • *
  • Posts: 4
DNR-322L Manual Record : "Enabled"
« on: June 06, 2014, 06:14:12 AM »

Hi, I,m new to this forum . I,m having few problem after upgraded to v2.00b07 . It should be all cause by 1 problem .

1. Setup > Recording Schedule > Manual Record : "Enabled" .
   
 - If i,m not wrong. , it should be "Disable" . No matter how I change my settings(Recording Mode) , it keep
   showing "Enabled" .
   
 - I've called up dlink CS to troubleshoot this issue , but can't resolve . Advise me to bring down to the CS to
   check .

 - Dlink CS replaced another unit with v2.00b07 firmware upgraded . Bring back setup everything was fine .
   2 days later found device forgotten to not update on mydlink account , so arrange the configuration .

 - After config the settings found "Manual Record : "Enabled"" again .

 - Tried System Restart, Restore To Factory Default Settings & all don't work .

 - Restore To Factory Default Settings don't even change anything , only password reset , the others camera
    settings still around .

2. Status > Camera Settings

 - Connection Status : Connected

 - Recording Status : No Recording

3. Live Video

 - Camera Played : Recording Mode not appeal on the screen(round icon in red & blue) .

4. Live Video

 - All camera icon was played & logout server , relogin & camera not on play mode .


Hope someone can help me on all this issue .

Thanks & Regards
Sgleong .
Logged

tiredcam

  • Level 1 Member
  • *
  • Posts: 22
Re: DNR-322L Manual Record : "Enabled"
« Reply #1 on: June 24, 2014, 01:49:53 AM »

Hi sgleong,

I am not quite sure where your problem is. I am guessing here but are you saying that the problem is the cameras not recording to the NVR?

Please be more specific.
Logged

fabyangm

  • Level 1 Member
  • *
  • Posts: 1
Re: DNR-322L Manual Record : "Enabled"
« Reply #2 on: November 09, 2014, 01:30:40 PM »

Hi sgleong,

I have the same problem with my DNR 322L, did you solved the problem???


Thanks...


Fabian.
Logged

Eddwood

  • Level 1 Member
  • *
  • Posts: 1
Re: DNR-322L Manual Record : "Enabled"
« Reply #3 on: January 07, 2015, 05:06:24 AM »

I have the same problem. Is there any solution?
Logged

x.rod

  • Level 1 Member
  • *
  • Posts: 1
Re: DNR-322L Manual Record : "Enabled"
« Reply #4 on: February 16, 2015, 06:50:25 AM »

Hello people,

I have the same problem in my DNR-322L. Dlink provide any feedback to solve this ?

Regards,

X.Rod
Logged

msaum

  • Level 1 Member
  • *
  • Posts: 8
Re: DNR-322L Manual Record : "Enabled"
« Reply #5 on: March 15, 2015, 05:58:46 AM »

I have the same problem. Even after a factory reset and running the wizard the cameras will show up as recording.  However, given a few hours, all cameras will end up back at "No recording".  I am running the latest firmware on the DNR-322L and all of the cameras.

Mark
Logged

tomsimpson

  • Level 1 Member
  • *
  • Posts: 6
Re: DNR-322L Manual Record : "Enabled"
« Reply #6 on: May 29, 2015, 11:17:14 PM »

Damn, I've got the same problem too - my unit stopped recording in February this year.  Now no matter what I set for the recording schedule, the status page shows:

Index Name Address Connection Status Recording Status Frame Rate Bit Rate
Load Camera Status...
1 FrontPorch 192.168.0.215 Connected No Recording 14.2 fps 4293.5 Kbps
2 Driveway 192.168.0.214 Disconnect No Recording 0.0 fps 0.0 Kbps
3 FrontPorch-2 192.168.0.210 Connected No Recording 15.0 fps 1414.1 Kbps
4 BackPatio 192.168.0.211 Connected No Recording 19.4 fps 2101.3 Kbps
5 Footpath 192.168.0.212 Connected No Recording 12.9 fps 2875.1 Kbps
6 BackDoorStep 192.168.0.216 Connected No Recording 10.2 fps 1419.1 Kbps
7 Hall 192.168.0.213 Connected No Recording 1.0 fps 463.9 Kbps
Logged

sijr

  • Level 1 Member
  • *
  • Posts: 1
Re: DNR-322L Manual Record : "Enabled"
« Reply #7 on: July 15, 2015, 09:36:21 AM »

Hi all

Waisted one day trying to solve the same problem... and there is no way within the embedded web server. >:(

but finaly found a strange soltution:
Just start the recording within mydlink.

hope that can help.
Logged

Jasonn88

  • Level 1 Member
  • *
  • Posts: 19
Re: DNR-322L Manual Record : "Enabled"
« Reply #8 on: July 29, 2015, 08:37:40 AM »

I have the same problem. As suggested by one of the members here, I managed to turn on the recording from mydlink. This is a bug? Weird behavior and dlink should fix this in next release.
Logged