• September 19, 2020, 10:02:21 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR 628 losing signal alot  (Read 6355 times)

rosier1

  • Level 1 Member
  • *
  • Posts: 2
DIR 628 losing signal alot
« on: May 07, 2013, 10:24:43 AM »

Hi all...New guy here. Having a problem with my router, when I download something or put what I will call a load on the router,(Don't know how else to say it) I lose my signal to my laptop. Normal web use it works fine. When I download a large file, When I am watching a video on youtube I lose signal. When I try to scan over the wifi it loses its signal. When I ran the wifi unsecured I never had a problem. Since securing it I get the problem. When I had an unsecured network it never ever dropped its signal.
All my other stuff is not having a problem, just the laptop. My cell phone loses it sometimes but I figure thats normal. Tablets, xbox, Wii all work fine..... Any ideas?

Any help would be appreciated

Matt
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49186
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 628 losing signal alot
« Reply #1 on: May 07, 2013, 10:26:47 AM »

Link>Welcome!

What Hardware version is your router? Look at sticker under router.
Link>What Firmware version is currently loaded? Found on routers web page under status.
What region are you located?

Has a Factory Reset been performed?

What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values
For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.

Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router.
Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
Enable Use Unicasting (compatibility for some ISP DHCP Servers) under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting.
Ensure devices are set to auto obtain an IP address.
If IPv6 is an option on the router, select Local Connection Only or Disable IPv6 options under Setup/IPv6.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules. Enable IPv6 Multi-cast Streaming for routers that have a Media Server option. Disable IPv6 Multi-cast Streaming if IPv6 or Media Server is not being used.
Turn off WISH, and WPS under Advanced.
WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
Set current Time Zone, Date and Time. Use an NTP Server feature. Tools/Time.
 
Links>Wireless Installation Considerations and Managing Signal Congestion
Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
What wireless modes are you using?
2.4Ghz and 5Ghz routers: Try single mode G or mixed G and N on 2.4Ghz and single mode N on 5Ghz?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.

What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto.
What wireless devices do you have connected?
Any cordless house phones?
Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many?

Try turning off Short GI, WLAN Partition,and Extra Wireless Protection if you have it. Under Advanced/Advanced Wireless.
Enable WMM Enable Under Advanced/Advanced Wireless.

Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired PC while testing.

Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

rosier1

  • Level 1 Member
  • *
  • Posts: 2
Re: DIR 628 losing signal alot
« Reply #2 on: May 07, 2013, 12:39:22 PM »

Thanks for the quick response!.. So far it seems that simply changing the name was the cure!  Thanks so much! ;D
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49186
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 628 losing signal alot (RESOLVED)
« Reply #3 on: May 07, 2013, 12:44:03 PM »

Awesome, ya, sometimes the default SSID name needs to be changed as there maybe other DLink routers near by with the same name. We always recommend to change the name soon as the router is put online and setup.

Can follow some of the other suggestions. However should work well for you.
Let us know if you need anything else.

Enjoy.
 ;)
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!