• December 14, 2019, 03:10:40 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 2 - 5mb p/second LAN Speeds  (Read 6184 times)

wilschroter

  • Level 1 Member
  • *
  • Posts: 1
2 - 5mb p/second LAN Speeds
« on: March 09, 2013, 09:29:01 AM »

Within my wired LAN on my DIR 865L I can only seem to transfer files (disk to disk) at around 2 - 5mb /second.  This is with 2 PC's directly wired to the same DIR 865L router.

The speed should be much much faster for LAN access.  Where can I troubleshoot this?  Appreciate any help.  I'm pretty knowledgeable about PCs.  This is a Windows 7 Professional N environment.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47985
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 2 - 5mb p/second LAN Speeds
« Reply #1 on: March 09, 2013, 09:59:34 AM »

Link>Welcome!
What Hardware version is your router? Look at sticker under router.
Link>What Firmware version is currently loaded? Found on routers web page under status.
What region are you located?

Has a Factory Reset been performed?
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired PC while testing.

Be sure all background running applications on PCs are disabled.

Check cable between router and PCs, swap out to be sure. Link> Cat6 is recommended.

Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router.
Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting.
Ensure devices are set to auto obtain an IP address.
If IPv6 is an option on the router, select Local Connection Only or Disable IPv6 options under Setup/IPv6.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules.
WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
Set current Time Zone, Date and Time. Use an NTP server feature. Tools/Time.
 
 
« Last Edit: March 09, 2013, 10:01:41 AM by FurryNutz »
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47985
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 2 - 5mb p/second LAN Speeds
« Reply #2 on: March 15, 2013, 07:13:44 AM »

Any status on this?  ???
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting