• October 16, 2019, 04:52:01 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 2 [3]

Author Topic: Lexmark Wireless Printer Problem Pro 805  (Read 19375 times)

FurryNutz

  • Poweruser

  • ▲▲
  • *****
  • Posts: 47838
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #30 on: February 24, 2013, 03:38:31 PM »

Good luck in your endeavors.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Hard Harry

  • Guest
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #31 on: February 24, 2013, 03:46:52 PM »

OK, I will go eat popcorn, and you can go learn about networking and fix the problem yourself. Buuu bye!
Logged

ZMEU.NET

  • Level 2 Member
  • **
  • Posts: 32
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #32 on: February 24, 2013, 04:31:20 PM »

« Last Edit: February 24, 2013, 04:42:34 PM by ZMEU.NET »
Logged

FurryNutz

  • Poweruser

  • ▲▲
  • *****
  • Posts: 47838
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #33 on: February 24, 2013, 04:59:49 PM »

Informational Only! No posting!
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

ZMEU.NET

  • Level 2 Member
  • **
  • Posts: 32
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #34 on: February 24, 2013, 05:24:31 PM »

Ok i finished setting the Netgear as AP,  if the lexmark will remain connected for more than 2 days  then it's ok.
 What to do after to diagnose the D-Link problem?
  
Am i the only one using Lexmark printer with D-LINK Router?

I think D-link is not prepared to understand the wifi connection of a printer in power save. The netgear has 2-3 settings,  instead the dlink has 20 settings for the Wifi. The b/g/n or wep wpa wpa2 aes tkip are a false track.
 There may be something with the Transmission Rate :   Best (Automatic)..
or ADVANCED WIRELESS SETTINGS
Transmit Power :   
Beacon Period :    (20..1000)
RTS Threshold :    (0..2347)
Fragmentation Threshold :    (256..2346)
DTIM Interval :   

These default settings may not work with WiFi Lexmark power save .
« Last Edit: February 24, 2013, 05:52:32 PM by ZMEU.NET »
Logged

ZMEU.NET

  • Level 2 Member
  • **
  • Posts: 32
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #35 on: February 24, 2013, 07:01:22 PM »

10 other WiFi networks huh? This could also be a source of your problems. Having 10 other near by WiFi networks could be causing WiFi congestion as they are all trying to use up available channels, 1 thru 11 and some are probably using the same channel which is not preferred.

You may want to switch from 2.4Ghz to 5Ghz in your area.
My printer is 2.4Ghz. Do you have a  5Ghz printer?
Logged

ZMEU.NET

  • Level 2 Member
  • **
  • Posts: 32
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #36 on: February 25, 2013, 05:31:16 AM »

Ok i found an interesting article here http://forums.smallnetbuilder.com/archive/index.php?t-4741.html    Problems with WNDR3700 and Lexmark wifi printers.

02-25-2011, 07:57 PM
I got a problem with my Lexmark S305 printer, loosing connection to my WNDR3700, sort of.

Sort of, because it's still listed in the attached devices, that tells me that the router didn't forget the printer, so I guess that the Lexmark printer has a problem, sort of sleeping to deep... But read on, I can force it, trough the router, to wake up with out touching the printer.

You should also know that after set up or power up, it all starts out working perfect. Then the printer goes to sleep and if no one prints anything for more then an hour or so, I can't print from it again. To get it to connect again, I have to pull the power from the printer and reconnect it. An other option is from the WNDR3700 in the advanced wireless tap, just click apply in the bottom. I think that make the router power cycle the wireless radio and some how it reconnects and start working again. I cant seem to figure out if the problem is in the Router or printer end. Since I can do things in both ends to make it reconnect...

One guy in the WNDR3700 forums said the following:
After a specified time every wifi device changes it's security key automatically (known as 'key renewal'). This is to keep the wifi connection secure. In some routers one can change the time ,measured in seconds, until the key renewal will occur. The default time is often 3600 seconds, on my Dlink DIR-655 I could change this. Unfortunately the WNDR3700 does not offer this option. So after this time the router wants to renew the WPA encryption. It seems the Lexmark Pro901 is not able to to this while in standby. Once this key renewal has failed it won't connect afterwards. I don't know if this is an error with the router or the Lexmark printer.

It seems like he could be right, and that I have the same problem with my Lexmark S305. But who is at fault here? I imagine that both company's is going to point fingers at the other, not doing anything to fix the problem.

What do you think? Also is anyone in here using the WNDR3700 with wifi printers and does it work as it should, as in when you press print, it prints, even if you haven't been printing for a month?

Thanks Kasper
Logged

FurryNutz

  • Poweruser

  • ▲▲
  • *****
  • Posts: 47838
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #37 on: February 25, 2013, 07:15:18 AM »

You'll need to post this question over on the NG forums.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

ZMEU.NET

  • Level 2 Member
  • **
  • Posts: 32
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #38 on: February 26, 2013, 04:23:51 AM »

You still don't get it or worst not willing to help me more than copy pasting  useless Dlink questionnaire of all possible settings.
The guy explained here this common problem: After a specified time every wifi device changes it's security key automatically (known as 'key renewal'). This is to keep the wifi connection secure. In some routers one can change the time ,measured in seconds, until the key renewal will occur. .... So after this time the router wants to renew the WPA encryption. It seems the Lexmark Pro901 is not able to to this while in standby. Once this key renewal has failed it won't connect afterwards. I don't know if this is an error with the router or the Lexmark printer.
Logged

davevt31

  • Level 8 Member
  • ***
  • Posts: 1476
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #39 on: February 26, 2013, 08:25:54 AM »

If all other devices work fine, it's the Printer's issue not the router.  First thing to look for is a firmware upgrade for the printer.  Lexmark often updates their firmware.  You can also try disabling the standby mode on the printer to see if it reatains its connection.
Logged

ZMEU.NET

  • Level 2 Member
  • **
  • Posts: 32
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #40 on: February 26, 2013, 10:24:16 AM »

of course i have the latest firmware, is from 2011. My only problem is in power save, no reason to leave it always power on,no problem then.
i disabled security on my router , leaving the router invisible and activating mac access control... Lexmark in power save is still connected in power save since 36 hours.
 But now my dir 655 randomly restarts, i got hacked??
From the logs i see someone sent restart command Jan 1 00:00:45    UDHCPD Received a SIGTERM
Jan 1 00:00:45    [ 45.340000] usbcore: deregistering interface driver KC NetUSB General Driver
Jan 1 00:00:45    [ 45.120000] flags=0
Jan 1 00:00:45    [ 45.120000] ioctl eth0, 35312
Jan 1 00:00:44    received signal 15, good-bye
Jan 1 00:00:38    gpio create pidfile /var/run/gpio_wan_green.pid
Jan 1 00:00:38    HTTP listening on port 65530
Jan 1 00:00:37    pppd sent restart signal to rc
Jan 1 00:00:37    pppd check for rc to be idle ?
Jan 1 00:00:35    pppd is waiting 2 Secs for rc to be idle

Time   Message
Jan 1 00:00:45    UDHCPD Received a SIGTERM
Jan 1 00:00:45    [ 45.340000] usbcore: deregistering interface driver KC NetUSB General Driver
Jan 1 00:00:45    [ 45.120000] flags=0
Jan 1 00:00:45    [ 45.120000] ioctl eth0, 35312
Jan 1 00:00:44    received signal 15, good-bye
Jan 1 00:00:38    gpio create pidfile /var/run/gpio_wan_green.pid
Jan 1 00:00:38    HTTP listening on port 65530
Jan 1 00:00:37    pppd sent restart signal to rc
Jan 1 00:00:37    pppd check for rc to be idle ?
Jan 1 00:00:35    pppd is waiting 2 Secs for rc to be idle
Jan 1 00:00:45    [ 45.120000] ioctl eth0, 35312
Jan 1 00:00:44    received signal 15, good-bye
Jan 1 00:00:38    gpio create pidfile /var/run/gpio_wan_green.pid
Jan 1 00:00:38    HTTP listening on port 65530
Jan 1 00:00:37    pppd sent restart signal to rc
Jan 1 00:00:37    pppd check for rc to be idle ?
Jan 1 00:00:35    pppd is waiting 2 Secs for rc to be idle
Jan 1 00:00:35    pppd is waiting for rc to be idle
Jan 1 00:00:35    pppd check for rc to be idle ?
Jan 1 00:00:33    pppd is waiting 2 Secs for rc to be idle
Feb 26 20:18:09     debug     UDHCPD sending ACK to 192.168.0.100
Feb 26 20:17:40     info     [   85.290000] '[DROPPED-PACKET]:'IN= OUT=ppp0 SRC=188.26.151.129 DST=157.56.149.60 PROTO=ICMP TYPE=3 CODE=3
Feb 26 20:17:40     info     [   85.180000] '[DROPPED-PACKET]:'IN= OUT=ppp0 SRC=188.26.151.129 DST=2.95.85.129 PROTO=ICMP TYPE=3 CODE=3
Feb 26 20:17:39     debug     UDHCPD sending ACK to 192.168.0.100
Feb 26 20:17:36     info     [   81.740000] '[DROPPED-PACKET]:'IN= OUT=ppp0 SRC=188.26.151.129 DST=79.152.239.167 PROTO=ICMP TYPE=3 CODE=3
Feb 26 20:17:35     debug     UDHCPD sending ACK to 192.168.0.104
Feb 26 20:17:35     info     UDHCPD sending OFFER of 192.168.0.104
Feb 26 20:17:33     info     [   78.910000] '[DROPPED-PACKET]:'IN= OUT=ppp0 SRC=188.26.151.129 DST=188.134.46.105 PROTO=ICMP TYPE=3 CODE=3
Jan  1 00:01:16     info     NOIP2: Update DDNS Success
Jan  1 00:01:12     info     [   72.630000] '[DROPPED-PACKET]:'IN= OUT=ppp0 SRC=188.26.151.129 DST=190.212.193.101 PROTO=ICMP TYPE=3 CODE=3
Jan  1 00:01:06     info     [   66.660000] '[DROPPED-PACKET]:'IN=ppp0 OUT= SRC=92.114.81.133 DST=188.26.151.129 PROTO=TCP SPT=64132 DPT=46328
Jan  1 00:01:00     info     [   60.780000] '[DROPPED-PACKET]:'IN=ppp0 OUT= SRC=92.114.81.133 DST=188.26.151.129 PROTO=TCP SPT=64132 DPT=46328
Jan  1 00:00:57     info     [   57.720000] '[DROPPED-PACKET]:'IN=ppp0 OUT= SRC=92.114.81.133 DST=188.26.151.129 PROTO=TCP SPT=64132 DPT=46328
Jan  1 00:00:56     notice     HTTP listening on port 65530
Jan  1 00:00:54     info     [   54.450000] usbcore: registered new interface driver KC NetUSB General Driver
Jan  1 00:00:53     info     [   53.760000] flags=1
Jan  1 00:00:53     info     [   53.760000] ioctl eth0, 35312
Jan  1 00:00:53     debug     UDHCPD sending ACK to 192.168.0.100
Jan  1 00:00:50     info     device_lan_ip=192.168.0.1 , device_lan_subnet_mask=255.255.255.0
Jan  1 00:00:50     info     DHCP server start.
Jan  1 00:00:45     debug     UDHCPD Received a SIGTERM
Jan  1 00:00:45     info     [   45.340000] usbcore: deregistering interface driver KC NetUSB General Driver
Jan  1 00:00:45     info     [   45.120000] flags=0
Jan  1 00:00:45     info     [   45.120000] ioctl eth0, 35312
Jan  1 00:00:44     notice     received signal 15, good-bye
Jan  1 00:00:38     debug     gpio create pidfile /var/run/gpio_wan_green.pid
Jan  1 00:00:38     notice     HTTP listening on port 65530
Jan  1 00:00:37     notice     pppd sent restart signal to rc
Jan  1 00:00:37     notice     pppd check for rc to be idle ?
Jan  1 00:00:35     notice     pppd is waiting 2 Secs for rc to be idle
Jan  1 00:00:35     notice     pppd is waiting for rc to be idle
Jan  1 00:00:35     notice     pppd check for rc to be idle ?
Jan  1 00:00:33     notice     pppd is waiting 2 Secs for rc to be idle
Jan  1 00:00:33     notice     pppd is waiting for rc to be idle
Jan  1 00:00:33     notice     pppd check for rc to be idle ?
Jan  1 00:00:31     notice     pppd is waiting 2 Secs for rc to be idle
Jan  1 00:00:31     notice     pppd is waiting for rc to be idle
Jan  1 00:00:31     notice     pppd check for rc to be idle ?
Jan  1 00:00:29     notice     pppd is waiting 2 Secs for rc to be idle
Jan  1 00:00:29     notice     pppd is waiting for rc to be idle
Jan  1 00:00:29     notice     pppd check for rc to be idle ?
Jan  1 00:00:28     info     [   28.530000] usbcore: registered new interface driver KC NetUSB General Driver
Jan  1 00:00:27     notice     pppd is waiting 2 Secs for rc to be idle
Jan  1 00:00:27     notice     pppd is waiting for rc to be idle
Jan  1 00:00:27     notice     pppd check for rc to be idle ?
Jan  1 00:00:27     info     [   27.710000] flags=1
Jan  1 00:00:27     info     [   27.710000] ioctl eth0, 35312
Jan  1 00:00:26     info     [   26.790000] br0: port 1(eth0.2) entering forwarding state
Jan  1 00:00:26     info     [   26.790000] br0: topology change detected, propagating
Jan  1 00:00:25     notice     pppd is waiting 2 Secs for rc to be idle
Jan  1 00:00:25     notice     pppd is waiting for rc to be idle
Jan  1 00:00:25     notice     pppd check for rc to be idle ?
Jan  1 00:00:25     debug     gpio create pidfile /var/run/gpio_wlan.pid
Jan  1 00:00:25     info     [   25.790000] br0: port 1(eth0.2) entering learning state
Jan  1 00:00:25     info     [   25.790000] device eth0.2 entered promiscuous mode
Jan  1 00:00:25     info     [   25.210000] br0: port 2(ath0) entering forwarding state
Jan  1 00:00:25     info     [   25.210000] br0: topology change detected, propagating
Jan  1 00:00:24     info     [   24.770000] br0: port 1(eth0.2) entering disabled state
Jan  1 00:00:24     info     [   24.770000] device eth0.2 left promiscuous mode
Jan  1 00:00:24     info     [   24.210000] br0: port 2(ath0) entering learning state
Jan  1 00:00:24     info     [   24.210000] device ath0 entered promiscuous mode
Jan  1 00:00:23     notice     pppd is waiting 2 Secs for rc to be idle
Jan  1 00:00:23     notice     pppd is waiting for rc to be idle
Jan  1 00:00:23     notice     pppd check for rc to be idle ?
Jan  1 00:00:22     info     [   22.240000] /proc/igmp6_ath0 created
Jan  1 00:00:22     info     [   22.240000] /proc/igmp_ath0 created
« Last Edit: February 26, 2013, 10:26:00 AM by ZMEU.NET »
Logged

ZMEU.NET

  • Level 2 Member
  • **
  • Posts: 32
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #41 on: February 26, 2013, 10:26:09 AM »

Jan  1 00:00:21     info     [   21.920000] Copyright (c) 2008 Atheros Communications, Inc. All Rights Reserved
Jan  1 00:00:21     info     [   21.920000] wlan_me: Version 0.1
Jan  1 00:00:21     notice     pppd is waiting 2 Secs for rc to be idle
Jan  1 00:00:21     notice     pppd is waiting for rc to be idle
Jan  1 00:00:21     notice     pppd check for rc to be idle ?
Jan  1 00:00:21     notice     ipcp_up: remote PPP IP address 10.0.0.1
Jan  1 00:00:21     notice     ipcp_up: local PPP IP address 188.26.151.129
Jan  1 00:00:21     notice     ipcp_up: Open /var/tmp/pptp_server_ip.txt (l2tp_server_ip.txt) fail or Using PPPoE
Jan  1 00:00:21     debug     rcvd [IPCP ConfAck id=0x2 'addr 188.26.151.129']
Jan  1 00:00:21     debug     sent [IPCP ConfReq id=0x2 'addr 188.26.151.129']
Jan  1 00:00:21     debug     rcvd [IPCP ConfNak id=0x1 'addr 188.26.151.129']
Jan  1 00:00:21     debug     sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 00 00 00 00 00 00 00 01]
Jan  1 00:00:21     debug     rcvd [IPV6CP ConfReq id=0x1 'addr fe80::0000:0000:0000:0001']
Jan  1 00:00:21     debug     sent [IPCP ConfAck id=0x1 'addr 10.0.0.1']
Jan  1 00:00:21     debug     rcvd [IPCP ConfReq id=0x1 'addr 10.0.0.1']
Jan  1 00:00:21     debug     sent [IPCP ConfReq id=0x1 'addr 0.0.0.0']
Jan  1 00:00:21     notice     peer from calling number 90:E2:BA:12:27:6B authorized
Jan  1 00:00:21     notice     PAP authentication succeeded
Jan  1 00:00:21     debug     rcvd [PAP AuthAck id=0x1   ]
Jan  1 00:00:21     debug     rcvd [LCP EchoRep id=0x0 magic=0xaf2404a8]
Jan  1 00:00:21     debug     sent [LCP EchoRep id=0x0 magic=0xf6a148c0]
Jan  1 00:00:21     debug     rcvd [LCP EchoReq id=0x0 magic=0xaf2404a8]
Jan  1 00:00:21     debug     sent [PAP AuthReq id=0x1 user= BB982485  password='hidden']
Jan  1 00:00:21     debug     sent [LCP EchoReq id=0x0 magic=0xf6a148c0]
Jan  1 00:00:21     debug     rcvd [LCP ConfAck id=0x1 'mru 1492' 'magic 0xf6a148c0']
Jan  1 00:00:21     info     [   21.840000] wlan: mac acl policy registered
Jan  1 00:00:21     debug     sent [LCP ConfReq id=0x1 'mru 1492' 'magic 0xf6a148c0']
Jan  1 00:00:21     info     [   21.540000] wifi0: Atheros 9280: mem=0x80000000, irq=22 hw_base=0x80000000
Jan  1 00:00:21     info     [   20.740000] ath_pci: 0.9.4.5 (Atheros/multi-bss)
Jan  1 00:00:21     info     [   20.670000] module ath_pci: OCM instruction memory allocation of 4776 @3ffdb17c
Jan  1 00:00:19     info     [   19.620000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
Jan  1 00:00:19     info     [   19.570000] module ath_dev: OCM instruction memory allocation of 19296 @3ffd661c
Jan  1 00:00:19     debug     UDHCPD sending ACK to 192.168.0.100
Jan  1 00:00:19     debug     sent [LCP ConfAck id=0x1 'mru 1492' 'auth pap' 'magic 0xaf2404a8']
Jan  1 00:00:19     debug     rcvd [LCP ConfReq id=0x1 'mru 1492' 'auth pap' 'magic 0xaf2404a8']
Jan  1 00:00:19     info     UDHCPD sending OFFER of 192.168.0.100
Jan  1 00:00:18     debug     sent [LCP ConfReq id=0x1 'mru 1492' 'magic 0xf6a148c0']
Jan  1 00:00:18     notice     Connect: ppp0 '--' eth0.1
Jan  1 00:00:18     info     Using interface ppp0
Jan  1 00:00:18     debug     using channel 1
Jan  1 00:00:18     info     PPP session is 1374
Jan  1 00:00:18     debug     PADS: Service-Name: 'ftth'
Jan  1 00:00:18     info     [   18.530000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
Jan  1 00:00:18     info     [   18.510000] module ath_rate_atheros: OCM instruction memory allocation of 2788 @3ffd5b38
Jan  1 00:00:18     info     [   18.490000] wlan: 0.8.4.2 (Atheros/multi-bss)
Jan  1 00:00:18     info     [   18.320000] module wlan: OCM instruction memory allocation of 13976 @3ffd24a0
Jan  1 00:00:18     info     [   18.280000] ath_hal: 0.9.17.1 (AR5416, 11D)
Jan  1 00:00:18     info     [   18.250000] module ath_hal: OCM instruction memory allocation of 2568 @3ffd1a98
Jan  1 00:00:18     info     rp_pppoe =' read pppoe_conn_session error or first time dial
Jan  1 00:00:18     notice     pppd 2.4.3 started by root, uid 0
Jan  1 00:00:18     info     RP-PPPoE plugin inform wantimer to reset auth, discovery variable
Jan  1 00:00:18     info     RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3
Jan  1 00:00:18     info     Plugin /lib/pppd/2.4.3/rp-pppoe.so loaded.
Jan  1 00:00:17     info     device_lan_ip=192.168.0.1 , device_lan_subnet_mask=255.255.255.0
Jan  1 00:00:17     info     DHCP server start.
Jan  1 00:00:14     info     [Initialized, firmware version: 2.06 ]
Jan  1 00:00:13     info     [    9.690000] br0: topology change detected, propagating
Jan  1 00:00:13     info     [    8.690000] br0: port 1(eth0.2) entering learning state
Jan  1 00:00:13     info     [    8.660000] device eth0.2 entered promiscuous mode
Jan  1 00:00:13     info     [    7.940000] device eth0 entered promiscuous mode
Jan  1 00:00:13     info     [    4.180000] eth0: register VLAN for HW acceleration
Jan  1 00:00:13     info     [    4.160000] eth open eth0
Jan  1 00:00:13     notice     [    3.900000] Freeing unused kernel memory: 5192k freed (0x403b6000 - 0x408c7000)
Jan  1 00:00:13     info     [    3.890000] All bugs added by David S. Miller 'davem@redhat.com'
Jan  1 00:00:13     info     [    3.890000] 802.1Q VLAN Support v1.8 Ben Greear 'greearb@candelatech.com'
Jan  1 00:00:13     info     [    3.890000] NET: Registered protocol family 17
Jan  1 00:00:13     info     [    3.890000] IPv6 over IPv4 tunneling driver
Jan  1 00:00:13     info     [    3.890000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:13     info     [    3.890000] NET: Registered protocol family 10
Jan  1 00:00:13     info     [    3.890000] TCP cubic registered
Jan  1 00:00:13     info     [    3.890000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:13     info     [    3.890000] IPv4 over IPv4 tunneling driver
Jan  1 00:00:13     info     [    3.860000] usbcore: registered new interface driver libusual
Jan  1 00:00:13     info     [    3.860000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan  1 00:00:13     info     [    3.860000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 00:00:13     notice     [    3.850000] 6 cmdlinepart partitions found on MTD device ubicom32_boot_flash
Jan  1 00:00:13     info     [    3.850000] ubicom32flashdriver ubicom32flashdriver: mx25l64 (8192 Kbytes)
Jan  1 00:00:13     info     [    3.850000] eth_wan does not exist
Jan  1 00:00:13     info     [    3.850000] eth0 vp_base:0x3fffbb6c, tio_int:11 irq:23 feature:0x180
Jan  1 00:00:13     info     [    3.850000] usbcore: registered new interface driver rndis_host
Jan  1 00:00:13     info     [    3.850000] usbcore: registered new interface driver cdc_ether
Jan  1 00:00:13     info     [    3.850000] usbcore: registered new interface driver asix
Jan  1 00:00:13     info     [    3.850000] NET: Registered protocol family 24
Jan  1 00:00:13     info     [    3.850000] PPP MPPE Compression module registered
Jan  1 00:00:13     info     [    3.850000] PPP BSD Compression module registered
Jan  1 00:00:13     info     [    3.850000] PPP Deflate Compression module registered
Jan  1 00:00:13     info     [    3.850000] PPP generic driver version 2.4.2
Jan  1 00:00:13     info     [    3.850000] brd: module loaded
Jan  1 00:00:13     info     [    3.730000] ttyUM0 at MMIO 0x1000300 (irq = 62) is a UBI32_MAILBOX
Jan  1 00:00:13     info     [    3.730000] Serial: Ubicom32 mailbox serial driver.
Jan  1 00:00:13     info     [    3.730000] ubicom32 rng init
Jan  1 00:00:13     info     [    3.730000] ubicom32 rng started
Jan  1 00:00:13     info     [    3.730000] N_HDLC line discipline registered.
Jan  1 00:00:13     info     [    3.730000] HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
Jan  1 00:00:13     info     [    3.510000] io scheduler noop registered (default)
Jan  1 00:00:13     info     [    3.510000] alg: No test for stdrng (krng)
Jan  1 00:00:13     info     [    3.510000] msgmni has been set to 108
Jan  1 00:00:13     info     [    3.510000] JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
Jan  1 00:00:13     info     [    3.510000] Registering unionfs 2.5.1 (for 2.6.28.1)
Jan  1 00:00:13     info     [    3.510000] ar8316 (ID=0x004dd041) switch chip initialized
Jan  1 00:00:13     info     [    3.510000] Registered switch device: ar8316-smi
Jan  1 00:00:12     info     [    3.340000] input: Ubicom32 Input as /class/input/input0
Jan  1 00:00:12     info     [    3.340000] ipProfile (profiling) is not enabled in Ultra.  Profiler /proc interface is disabled.
Jan  1 00:00:12     info     [    0.380000] NET: Registered protocol family 1
Jan  1 00:00:12     info     [    0.380000] /proc/ttl_ipmr created
Jan  1 00:00:12     info     [    0.350000] TCP reno registered
Jan  1 00:00:12     info     [    0.350000] TCP: Hash tables configured (established 2048 bind 2048)
Jan  1 00:00:12     info     [    0.350000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 00:00:12     info     [    0.350000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
Jan  1 00:00:12     info     [    0.350000] /proc/ttl_ipv4 created
Jan  1 00:00:12     info     [    0.350000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 00:00:12     debug     [    0.270000] Switched to high resolution mode on CPU 0
Jan  1 00:00:12     notice     [    0.270000] timer[34]: oneshot
Jan  1 00:00:12     info     [    0.260000] NET: Registered protocol family 2
Jan  1 00:00:12     info     [    0.220000] hub 1-0:1.0: 1 port detected
Jan  1 00:00:12     info     [    0.220000] hub 1-0:1.0: USB hub found
Jan  1 00:00:12     info     [    0.220000] usb usb1: configuration #1 chosen from 1 choice
Jan  1 00:00:12     info     [    0.220000] musb_hdrc musb_hdrc.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:12     info     [    0.220000] musb_hdrc musb_hdrc.0: MUSB HDRC host driver
Jan  1 00:00:12     info     [    0.220000] musb_hdrc: USB Host mode controller at 02009800 using PIO, IRQ 13
Jan  1 00:00:12     debug     [    0.220000] musb_hdrc: hw_ep 5shared, max 64
Jan  1 00:00:12     debug     [    0.220000] musb_hdrc: hw_ep 4shared, max 512
Jan  1 00:00:12     debug     [    0.220000] musb_hdrc: hw_ep 3shared, max 512
Jan  1 00:00:12     debug     [    0.220000] musb_hdrc: hw_ep 2shared, max 1024
Jan  1 00:00:12     debug     [    0.220000] musb_hdrc: hw_ep 1shared, max 16
Jan  1 00:00:12     debug     [    0.220000] musb_hdrc: hw_ep 0shared, max 64
Jan  1 00:00:12     debug     [    0.220000] musb_hdrc: MHDRC RTL version 2.0
Jan  1 00:00:12     debug     [    0.220000] musb_hdrc: ConfigData=0x22 (UTMI-8, SoftConn)
Jan  1 00:00:12     info     [    0.220000] musb_hdrc: version 6.0, pio, host, debug=0
Jan  1 00:00:12     info     [    0.220000] usbcore: registered new device driver usb
Jan  1 00:00:12     info     [    0.220000] usbcore: registered new interface driver hub
Jan  1 00:00:12     info     [    0.220000] usbcore: registered new interface driver usbfs
Jan  1 00:00:12     notice     [    0.220000] SCSI subsystem initialized
Jan  1 00:00:12     info     [    0.220000] PCI: bus0: Fast back to back transfers enabled
Jan  1 00:00:12     info     [    0.220000] pci 0000:00:00.0: PME# disabled
Jan  1 00:00:12     info     [    0.220000] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 00:00:12     debug     [    0.220000] pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
Jan  1 00:00:12     info     [    0.220000] ubicom32_flash_init(): registering device resources
Jan  1 00:00:12     info     [    0.220000] ip7160rgw_init: registering SPI resources
Jan  1 00:00:12     info     [    0.220000] ip7160rgw_init: registering device resources
Jan  1 00:00:12     info     [    0.220000] Ubicom GPIO Controller
Jan  1 00:00:12     info     [    0.220000] NET: Registered protocol family 16
Jan  1 00:00:12     info     [    0.220000] net_namespace: 692 bytes
Jan  1 00:00:12     info     [    0.220000] OCM Instruction Heap 57 KB
Jan  1 00:00:12     info     [    0.020000] Calibrating delay loop... 199.47 BogoMIPS (lpj=997376)
Jan  1 00:00:12     info     [    0.020000] Memory available: 55344k/64752k RAM, (2308k kernel code, 5716k data)
Jan  1 00:00:12     info     [    0.020000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 00:00:12     info     [    0.010000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 00:00:12     info     [    0.000000] console [ttyUM0] enabled
Jan  1 00:00:12     notice     [    0.000000] timer[34]: periodic: 5000000 cycles
Jan  1 00:00:12     notice     [    0.000000] timer[34]: shutdown
Jan  1 00:00:12     notice     [    0.000000] timer[34]: timer-primary - created
Jan  1 00:00:12     notice     [    0.000000] Kernel command line: console=ttyUM0 console=ttyUS0 serdes=0x02004000,61,250000000 mtdparts=ubicom32_boot_flash:128k(bootloader),7360k(upgrade),384k(jffs2),64k(fw_env),192k(language_pack),64k(artblock)
Jan  1 00:00:12     debug     [    0.000000]   Movable zone: 0 pages used for memmap
Jan  1 00:00:12     debug     [    0.000000]   Normal zone: 16319 pages, LIFO batch:3
Jan  1 00:00:12     debug     [    0.000000]   Normal zone: 129 pages used for memmap
Jan  1 00:00:12     debug     [    0.000000]   DMA zone: 59 pages, LIFO batch:0
Jan  1 00:00:12     debug     [    0.000000]   DMA zone: 0 pages reserved
Jan  1 00:00:12     debug     [    0.000000]   DMA zone: 1 pages used for memmap
Jan  1 00:00:12     debug     [    0.000000] free_area_init_node: node 0, pgdat 403b2be8, node_mem_map 4092a800
Jan  1 00:00:12     debug     [    0.000000] On node 0 totalpages: 16508
Jan  1 00:00:12     info     [    0.000000]    3fffbbcc: sendirq=021, recvirq=013,  name=usbtio
Jan  1 00:00:12     info     [    0.000000]    3fffbc44: sendirq=255, recvirq=001,  name=traps
Jan  1 00:00:12     info     [    0.000000]    3fffbaac: sendirq=255, recvirq=255,  name=processor
Jan  1 00:00:12     info     [    0.000000]    3fffbb18: sendirq=010, recvirq=022,  name=pci
Jan  1 00:00:12     info     [    0.000000]    3fffbb6c: sendirq=011, recvirq=023,  name=eth_lan
Jan  1 00:00:12     info     [    0.000000]    3fffbc8c: sendirq=255, recvirq=255,  name=bootargs
Jan  1 00:00:12     info     [    0.000000]    3fffbed0: sendirq=255, recvirq=255,  name=board
Jan  1 00:00:12     info     [    0.000000] Device Tree:
Jan  1 00:00:12     info     [    0.000000] IP7K Processor, Ubicom, Inc. 'www.ubicom.com'
Jan  1 00:00:12     info     [    0.000000] updating range registers for expanded dram
Jan  1 00:00:12     info     [    0.000000] processor ocm 3ffc1f00-3fff4d00, expecting 3ffc1f00-3fff4d00
Jan  1 00:00:12     notice     [    0.000000] Linux version 2.6.28.10 (yufa@localhost.localdomain) (gcc version 4.4.1 20100320 (stable) (GCC) ) #6 Wed Feb 15 18:12:48 CST 2012
Jan  1 00:00:12     notice     klogd started: BusyBox v1.14.1 (2012-02-15 16:40:01 CST)
Logged

ZMEU.NET

  • Level 2 Member
  • **
  • Posts: 32
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #42 on: February 27, 2013, 04:15:29 AM »

Hello,
 Anybody in the house? Maybe the Dlink router has extra features in wifi security than the old Netgear.  If i disable the security on dlink my Lexmark printer won't lose the wifi connection after days in power save.
Logged

ZMEU.NET

  • Level 2 Member
  • **
  • Posts: 32
Re: Lexmark Wireless Printer Problem Pro 805
« Reply #43 on: February 28, 2013, 06:20:58 AM »

It's clearly a DLINK problem, i tried all wifi security protocols on NETGEAR and the Lexmark printer successfully remains connected for days in power save.
 It seems DLINK kicks out inactive wifi clients!
Logged
Pages: 1 2 [3]