• January 25, 2020, 03:12:19 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Problems setting up VLANs/trunks  (Read 3429 times)

DIrEctQL

  • Level 1 Member
  • *
  • Posts: 1
Problems setting up VLANs/trunks
« on: December 20, 2011, 09:30:53 AM »

Hi,

I have two Linux servers with following VLANs setup on the servers:

VLAN 5
VLAN 10
VLAN 15

I have one ethernet adapter on each server and I want to make these same VLANs talk to each other on both servers.  For some reason I am unable to make that happen with DGS-1224T switch.  How should the configuration look like on the switch?

Any help would be appreciated.
Logged

fles_dnoyeb

  • Level 1 Member
  • *
  • Posts: 2
Re: Problems setting up VLANs/trunks
« Reply #1 on: December 07, 2012, 03:38:37 AM »

Assuming you only have 1 NIC on each server, the setup should be simple.  You need 1 port going to each server.  Each port should be a tagged member of all 3 VLANs.
Logged

Planck

  • Level 1 Member
  • *
  • Posts: 23
Re: Problems setting up VLANs/trunks
« Reply #2 on: January 02, 2013, 10:23:27 AM »

Set the NIC to the same VLAN ID as the ones in the switch... simple:-)
Logged