• October 25, 2025, 02:00:01 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: maximum jumbo frame size in 1.07  (Read 9825 times)

drick

  • Level 3 Member
  • ***
  • Posts: 270
maximum jumbo frame size in 1.07
« on: April 18, 2009, 04:57:42 PM »
hi, i just read about 10 posts about jumbo frames but don't see a clear answer as to what the maximum (or optimal) size is?

my Netgear GS716T can support up to 10240, has anyone ever tried setting it that high before? if so did it work as advertised? it appears that my vista box can only support 4088 or 9014, but the W2K8 server can only support up to 7k MTU.

i assume that would mean that i would want to set vista to 4088 and 2k8 to 4k so they align? if the answer to this is yes, then where do i modify on the 323? a review of the manual yielded no information.
Logged
DNS-323v1.8 + ffp 0.5
2x750GB Seagate HDD's / RAID1+EXT3
DNS-343A - retired due to faulty fan
DNS-343B - retired due to faulty fan
DNS-343C v1.05b + ffp 0.5
4x2TB Seagate HDD's / RAID5+EXT3
Netgear RNDP6000
6x2TB WD HDD's / RAID6
Netgear WNDR4500

Zardoz66

  • Level 2 Member
  • **
  • Posts: 49
Re: maximum jumbo frame size in 1.07
« Reply #1 on: April 19, 2009, 01:43:02 PM »
you can set jumbo frames in the SETUP>>LAN under JUMBO FRAME SETTINGS: options are 3000,4000,5000,6000,7000,8000,9000.

some home routers can only do 4000, most switches can do 9000.

It is best to use the highest, however it's up to what your network can do. In my case 9000 worked the best for me and yielded the best preference.

My system 9014
DSN-323 9000
 
Logged
Zardoz66

DGL-4300 v1.9 | DAP-1522 v1.20 | DGS-2208 | DPR-1260 v1.24 | DNS-323 v1.6
1Gb JF=9k single drive mode
1 Seagate ST3300831AS 3NF1E956 300 G 
2 Seagate ST3300831AS 3NF1E03G 300 G

drick

  • Level 3 Member
  • ***
  • Posts: 270
Re: maximum jumbo frame size in 1.07
« Reply #2 on: April 19, 2009, 02:24:20 PM »
thanks for info zardoz.

i just spent the last few days reconfiguring my network to get ready for this. i have my 2 servers set at 9k, and the Retrospect box set at 7k. my switch supports over 10k, so that is a non issue.

i'm planning on using 9k when it gets here.

Logged
DNS-323v1.8 + ffp 0.5
2x750GB Seagate HDD's / RAID1+EXT3
DNS-343A - retired due to faulty fan
DNS-343B - retired due to faulty fan
DNS-343C v1.05b + ffp 0.5
4x2TB Seagate HDD's / RAID5+EXT3
Netgear RNDP6000
6x2TB WD HDD's / RAID6
Netgear WNDR4500

ShMiCk

  • Level 2 Member
  • **
  • Posts: 34
Re: maximum jumbo frame size in 1.07
« Reply #3 on: May 19, 2009, 11:02:41 PM »
Both my PC (HP TX2z) and DNS-323 support 9k jumbo frames, but for some reason 4k frames works best. I'm running cat6 cable. Any ideas why I get better speeds with 4k jumbo frames over 9k?

I'm using a DIR-655 router. Do I have to configure anything on the router?
Logged

fordem

  • Level 10 Member
  • *****
  • Posts: 2168
Re: maximum jumbo frame size in 1.07
« Reply #4 on: May 20, 2009, 06:04:09 AM »
The best frame size for a particular network will typically need to be determined by trial & error - the equipment being used, and the nature of the files both play a part, and yes, your router may be the reason that 4000 bytes works best for you.

Check the router manual - what is the maximum frame size it supports and does it need to be configured.
Logged
RAID1 is for disk redundancy - NOT data backup - don't confuse the two.

ShMiCk

  • Level 2 Member
  • **
  • Posts: 34
Re: maximum jumbo frame size in 1.07
« Reply #5 on: May 25, 2009, 11:57:04 PM »
Yeah, apparently my router, Dlink DIR-655 can only do a maximum of 4k Jumbo frames.

http://support.dlink.com/faq/view.asp?prod_id=3013&question=DIR-655
Logged

ttmcmurry

  • Level 4 Member
  • ****
  • Posts: 438
Re: maximum jumbo frame size in 1.07
« Reply #6 on: May 26, 2009, 09:06:45 PM »
At the moment I can't find the link to it; however that's partially true.

From the WAN side the jumbo size is 4K.
From the LAN side the jumbo size is 9K.

I'm running 9K with a DIR-655 on FW 1.31 (beta), connected to a DGS-2208, connected to a DNS-323. Not seeing any frame fragmentation or anything out of the ordinary.

You'd be hard-pressed to find a cable or DSL modem that would support more than 4K over the internet.
Logged

ShMiCk

  • Level 2 Member
  • **
  • Posts: 34
Re: maximum jumbo frame size in 1.07
« Reply #7 on: May 26, 2009, 11:37:10 PM »
Quote from: ttmcmurry on May 26, 2009, 09:06:45 PM
At the moment I can't find the link to it; however that's partially true.

From the WAN side the jumbo size is 4K.
From the LAN side the jumbo size is 9K.

I'm running 9K with a DIR-655 on FW 1.31 (beta), connected to a DGS-2208, connected to a DNS-323. Not seeing any frame fragmentation or anything out of the ordinary.

You'd be hard-pressed to find a cable or DSL modem that would support more than 4K over the internet.

Interesting, so maybe I should enable 9K on my PC/DNS-323
Logged