• December 14, 2019, 03:13:24 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Slow transfer speed with 320L  (Read 341 times)

ucalgary

  • Level 1 Member
  • *
  • Posts: 12
Slow transfer speed with 320L
« on: October 16, 2019, 07:43:11 AM »

Dear all

I tried to search all post about slow transfer speed with 320L, and cannot find the solution

I have 320L connected with 5e cable and TP-link C7. All connection is hard wired

However, the transfer speed is always about 5MB/s, never more than 5.5MB/s

I have replaced and swapped the cat5e cables. My computer has at least 50Mbs (7MBs) outgoing / incoming speed via internet

i have disabled uPnP off in my router , 1000 network has been set for my 320L, firmware 1.11

what else did i make mistakes ? screen captured for your reference

thank you



https://i.ibb.co/XZvtZsp/slow.jpg



« Last Edit: October 16, 2019, 09:15:44 AM by ucalgary »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47985
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Slow transfer speed with 320L
« Reply #1 on: October 16, 2019, 02:24:48 PM »

5Mb = 41.943Mpbs
Thats not too bad for this model.
Can you connect the DNS to a Gb external LAN switch with your PC and speed test again? Like a DGS-105 switch from D-Link.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

panagath

  • Level 1 Member
  • *
  • Posts: 1
Re: Slow transfer speed with 320L
« Reply #2 on: December 11, 2019, 11:24:38 AM »

Hello. I have this NAS too. Probably the worst electronic device I have every bought. Extremely slow. I have everything connected at 1000 + all with ethernet cables etc. I can't copy files almost at all. I'm even trying to copy my files to another USB drive so I can throw this NAS away.

Best speed I can get is 1.5MB/s using FTP. Throught SMB it takes hours even to count the files before start copying. CPU is always stuck at 100%.

Is there any quick way to get the data out? I tried to connect one of the drives directly to my macbook using a USB adapter and the macbook (and my ubuntu DELL) could not read the drive. Only the NAS can.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47985
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Slow transfer speed with 320L
« Reply #3 on: December 11, 2019, 01:25:08 PM »

Link>Welcome!

  • What Hardware version is your DNS? Look at the sticker behind or under the device.
  • Link>What Firmware version is currently loaded? Found on the DNSs web page under status.
  • What region are you located?

What Mfr and model is the main host router?

What Mfr and model HDD drive is installed in the dns?
How are you transferring to and from the DNS? PC?

Has a factory reset been performed and setup from scratch?

IS the DNS connecting at 1000Mpbs or something lower by chance?

Hello. I have this NAS too. Probably the worst electronic device I have every bought. Extremely slow. I have everything connected at 1000 + all with ethernet cables etc. I can't copy files almost at all. I'm even trying to copy my files to another USB drive so I can throw this NAS away.

Best speed I can get is 1.5MB/s using FTP. Throught SMB it takes hours even to count the files before start copying. CPU is always stuck at 100%.

Is there any quick way to get the data out? I tried to connect one of the drives directly to my macbook using a USB adapter and the macbook (and my ubuntu DELL) could not read the drive. Only the NAS can.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting