• October 25, 2020, 07:25:50 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Running DAP-1522 before my router?  (Read 3576 times)

justsupportplz

  • Level 1 Member
  • *
  • Posts: 2
Running DAP-1522 before my router?
« on: June 13, 2012, 12:15:11 PM »

My router is on a static IP, it is a Linksys WRT150N, and it doesn't have gigabit ports.  Is it possible to run it through the 1522's gigabit ports.

Modem -> 1522 -> actual router

Thanks!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49284
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Running DAP-1522 before my router?
« Reply #1 on: June 15, 2012, 08:53:59 AM »

No..DAP should be after Host router. If you need additional GB ports or Gb Ports on a router, they do have newer models with Gb port support.
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

Thiesy

  • Level 1 Member
  • *
  • Posts: 5
Re: Running DAP-1522 before my router?
« Reply #2 on: June 26, 2012, 11:12:12 AM »

Do you require GB-port to connect at high speed to your provider?
Or do you require GB-port to connect two clients in your LAN with GB-speed?
If the later is the case use following setup.

Modem -> actual router -> DAP-1522 -> client1
                                                   -> client2

both clients can exchange data with GB speed, provided both have GB port. Speed with your provider is limit by
a) the connect speed of the modem
b) the link speed between your 'actual router' and the DAP-1522, as the DAP-1522 has GB ports the speed is limit by the port on your router since I assume this to be lower.
whichever is lower.
Logged
DSR-250N
DAP-1522
DAP-2310
DGS-1210-16