• May 24, 2019, 12:31:07 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: SD card  (Read 6782 times)

Jackel

  • Level 1 Member
  • *
  • Posts: 5
SD card
« on: April 06, 2012, 11:12:21 PM »

Greetings,
I have been unable to get the micro SD card to record video or snapshot photo after setting up in SD recording. I have also tried formatting the card and rebooting the camera and it still will not record to the SD card. I have used the on/off Record button located on the Live Video page and it does work correctly. The forward email when motion detected also works well without problem. I am using the updated v1.01 firmware. I could not find any detailed instruction on how to setup the SD card to record in any of the documentation.
After several tests to record, it appears that some recording did occur. However, I am unable to access.
This is what is showing in SD management area.
~~~~~~~~~~~~~~~
SD Card  DCS-942/
SD Status : Ready
Name                                 Size
Total :  30756992 KB,  Used :  128 KB,  Free : 30756864 KB
~~~~~~~~~~~~~~~
Any help or guidance on how to view the video on this sd card would be appreciated.
All the best...
« Last Edit: April 07, 2012, 10:52:05 AM by Jackel »
Logged

RAYW

  • Level 1 Member
  • *
  • Posts: 3
Re: SD card
« Reply #1 on: April 08, 2012, 04:23:44 PM »

I had to do a firmware re-install + reset to get mine working.  Hope it works for you.

RayW
Logged

Bijoo

  • Level 1 Member
  • *
  • Posts: 4
Re: SD card
« Reply #2 on: April 08, 2012, 07:19:32 PM »

I did the following steps and it worked:

1- Hard reset the camera by sticking an unfolded paper clip into the reset button in the back of camera and holding it for 5 seconds
2- Re-installing the camera all over again as in the first time.

Logged

Jackel

  • Level 1 Member
  • *
  • Posts: 5
Re: SD card
« Reply #3 on: April 13, 2012, 07:43:20 PM »

Thank you. I will try it out.
Update: I did a hard reset which included a camera re-install and everything works great.
Thank you again and
All the Best!
« Last Edit: April 14, 2012, 10:20:10 AM by Jackel »
Logged