• January 23, 2020, 06:07:39 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Cable Diagnostics: Short and Open Errors  (Read 5433 times)


  • Level 1 Member
  • *
  • Posts: 1
Cable Diagnostics: Short and Open Errors
« on: July 16, 2016, 05:03:57 AM »

I have a small office that is experiencing issues with our VOIP phones (dropped packets) so I connected to our DGS-1224TP's web interface and ran the built-in cable test and found many errors. Short in cable (generally on pair 3 and 4). Open in cable (generally on pair 3 and 4) and some runs that have both a Short and Open on the cable. Does this indicate a problem, or might this be acceptable?

Of the 23 ports in use, only 5 reported as OKAY. Of note, all 5 are gigabit devices and of the 18 ports with Shorts and Opens, 17 are 10/100 devices. Thanks.
« Last Edit: July 16, 2016, 06:28:48 AM by CarbonGuy »


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 48228
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Cable Diagnostics: Short and Open Errors
« Reply #1 on: July 17, 2016, 11:52:50 AM »

Might start swapping any effected cabling out and see if this helps you troubleshoot weather if the cable issue or switch issue.
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting