• December 13, 2019, 05:54:57 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DSC-910 Cant manage to access camera outside my lan  (Read 3362 times)

mortuus

  • Level 1 Member
  • *
  • Posts: 1
DSC-910 Cant manage to access camera outside my lan
« on: January 18, 2011, 05:04:20 PM »

My new bought D-LINK DCS-910 network camera is refusing to work with my DynDNS host that i want to be able to monitor my cam outside my own networ. It is connected to my D-Link Dir 100 router. I have been in both my router and camera and entered the Dyndns settings, account etc. On testing it says its ok but when i go to my host that i setup on dyndns free all i get is to the routers default login page 192.168.0.1 where i need to login meaning i cant for example access this from work.

I have specified port 8080 in my dir-100 router and forwared it to the internal ip the camera default got in the manual but it seems outside my own network it does not work. I have used different ports to be sure its not blocked same problem. For example i have no problems mapping a port to use for hosting ftps and other stuff so why a dlink network cam refuses to work outside my network i cannot understand.. i soon give up.

IP Address 192.168.0.104 (forwarded on my router and port 8080).
Subnet Mask 255.255.255.0
Default Gateway 192.168.0.1
Primary DNS dhcp auto
Secondary DNS dhcp auto
DDNS Enable (Success )

Port settings
Second HTTP Port Enable Disable
port number 8080 enabled.


Router settings:
Allow Webcam *, * LAN, 192.168.0.104 *,8080
Logged