• March 18, 2019, 09:12:32 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Constantly power cycling? Read this.  (Read 3240 times)

tr5uydbfxlkjc

  • Level 1 Member
  • *
  • Posts: 1
Constantly power cycling? Read this.
« on: December 15, 2010, 10:29:51 PM »

http://forums.dlink.com/index.php?topic=11132.0

Okay, just linking to a different thread was a bit of a cop out.  But you guys keep posting new threads about having to power cycle, and the very simple suggestions in that thread will solve it (IF you have a rev A wbr 1310).

My experiences:
--Switching to DI-524 revD firmware solves stability problems, and is very easy to do.  I no longer needed to power cycle the router constantly.  However, with this firmware, WPA/WPA2 wifi connections were limited to about 2mpbs.
--Switching ultimately to the WBR 2310 firmware solved all of the problems.  The router is still rock-solid, and it runs WPA/WPA2 at full speed.  It is also pretty easy, but it takes a few more steps, and if you don't need wpa/wpa2, you're fine sticking with the di-524 revD.

(i only tested the intermediate step of di-624 firmware for a few hours; it worked fine, i suppose, but who knows.  to be safe, stick with di-524, or move through to wbr 2310.)
Logged