• July 07, 2020, 07:20:14 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 ... 8 9 [10] 11 12 ... 16

Author Topic: New firmware (1.10) release date for the DNS-323?  (Read 199648 times)

Eric-Tom

  • Level 1 Member
  • *
  • Posts: 20
Re: New firmware (1.10) release date for the DNS-323?
« Reply #135 on: March 12, 2011, 10:54:47 AM »

IMO, anyone that buys a product based on what it might do in the future is wasting their money.

I bought my two DNS323s baaed on what it can do NOW and I am very happy.

Sure there are a few bugs that I would like to see fixed, but if they had been 'sow stoppers' I would simply have returned them for a refund and bought something else.

Then why D-link reps AND D-link website still promote DNS-323 as a solution to home data server as a long term solution? In addition, isn't it illegal here in Canada to say that a prodcut will have at last one year warranty and turn around and say "anyone that buys a product based on what it might do in the future is wasting their money." Companies get sued for this!

According to laws, since my receipt reads I brought this yesterday from a registered D-link authorized dealer, they must provide support for at least one year EVEN if the product is discontinued.
« Last Edit: March 12, 2011, 10:56:46 AM by Eric-Tom »
Logged
DIR-825(Main Router)
DIR-655(Used as a wireless access point to extend the coverage)
DGS-1005G 5-Port Gigabit Desktop Switch
DNS-323 NAS with 2 WD 1.5TB in Standard 2 volume set up
PS3, my own server and 5 other computers on the network with BlackBerry 9700 and iPod on wifi

kingbobo

  • Level 1 Member
  • *
  • Posts: 1
Re: New firmware (1.10) release date for the DNS-323?
« Reply #136 on: March 12, 2011, 01:11:00 PM »

I just loaded 1.10 and here are my quick observations:

1) The print server no longer works.  I can see the printer attached to the 323 but cannot print.

I updated three 323's and all had the same issue.  I didn't go through the hassle of going to factory defaults yet but on one of them I rolled back to 1.09 and VIOLA!  I can print.

Has anyone successfully gotten the print server to work with 1.10 beta? I'm having the same problem as  mobilejukebox. Although I can see 'lp' when I browse for printers on the device, when I attempt to create the local port per fordem's technique (\\ip_address\lp), Windows complains that "The network name cannot be found". This has always worked for me in the past. Neither does it work when I attempt to install per D-Link's instructions.

-rob
Logged

TJ

  • Level 2 Member
  • **
  • Posts: 54
Re: New firmware (1.10) release date for the DNS-323?
« Reply #137 on: March 13, 2011, 07:44:53 PM »

My printer is working fine - all I had to do was reinstall the driver after the update, used the Windows 7 "add network printer" wizard.
Logged

eclipsed7

  • Level 1 Member
  • *
  • Posts: 6
Re: New firmware (1.10) release date for the DNS-323?
« Reply #138 on: March 19, 2011, 08:14:32 AM »

I have been running 1.10beta for about 2 weeks now.
I have noticed the following:
The fans do not kick in when the drives have not been accessed in awhile. The temps were at 45C and no fan, but when I went to get a file, the drives spun up and the fans turned on.

Also, when the bittorrent is running for awhile the transfer rates decrease, even with no files being transferred. If I stop and re-start the service, my transfer speeds go back to normal. Is there a way to start and re-start this service automatically?
Logged

harrytasker

  • Level 1 Member
  • *
  • Posts: 4
Re: New firmware (1.10) release date for the DNS-323?
« Reply #139 on: March 24, 2011, 11:56:12 AM »

any news on how the beta program is progressing?
Logged

D-Link Multimedia

  • Poweruser
  • Level 7 Member
  • **
  • Posts: 1066
    • D-link Systems, Inc.
Re: New firmware (1.10) release date for the DNS-323?
« Reply #140 on: March 24, 2011, 12:50:31 PM »

I have another version of beta build 06 that is going through lab testing. We expect it to release officially early april if no major issues are found.
Logged

TJ

  • Level 2 Member
  • **
  • Posts: 54
Re: New firmware (1.10) release date for the DNS-323?
« Reply #141 on: March 24, 2011, 06:04:47 PM »

Beta build 06 will be released early April, or the official firmware?
Logged

blackbox

  • Level 2 Member
  • **
  • Posts: 34
Re: New firmware (1.10) release date for the DNS-323?
« Reply #142 on: March 25, 2011, 12:12:27 AM »

I have another version of beta build 06 that is going through lab testing. We expect it to release officially early april if no major issues are found.

Can you make the "beta build 06" available for download please?
Logged

eilz

  • Level 1 Member
  • *
  • Posts: 18
Re: New firmware (1.10) release date for the DNS-323?
« Reply #143 on: March 25, 2011, 03:49:59 AM »

I have another version of beta build 06 that is going through lab testing. We expect it to release officially early april if no major issues are found.

DLINK -- On Related >> post titled "DNS-323 Fan Powerdown problems"  MODEL C1 RELATED
http://forums.dlink.com/index.php?topic=10072.msg123119#msg123119

I posted
"q1 Now that 1.10 turns off fans ON C1 MODEL, has anyone actually seem them come on when they past a certain temp, as earlier post says they are reaching 37C and the fans are still off, which is quite worrying? also Can you controll fan temp e.g. I mean set the temp they come on lower than 37C?"

tosbert REPLIED WITH :

Apparently, d-link say -

OFF = 43 degree celcius
LOW = 46 degree celcius
HIGH = 49 degree celcius


Can you please confirm this is TRUE, and is there a way to control, as I personally think 46degrees is too high before the low fan kicks in and would prefer it be lower say
OFF  = <37
LOW = 39
HIGH = "as is"


PLEASE PLEASE PLASE > ANY CHANCE OF THIS CHANGE IN BETA6 PLEASE :-*  THANKS!!!!
« Last Edit: March 25, 2011, 03:54:15 AM by eilz »
Logged

dosborne

  • Level 5 Member
  • *****
  • Posts: 598
Re: New firmware (1.10) release date for the DNS-323?
« Reply #144 on: March 25, 2011, 06:56:42 AM »

Then why D-link reps AND D-link website still promote DNS-323 as a solution to home data server as a long term solution? In addition, isn't it illegal here in Canada to say that a prodcut will have at last one year warranty and turn around and say "anyone that buys a product based on what it might do in the future is wasting their money." Companies get sued for this!

According to laws, since my receipt reads I brought this yesterday from a registered D-link authorized dealer, they must provide support for at least one year EVEN if the product is discontinued.
I think you are severely mis-informed and did not understand what I was saying. Nobody is disputing that they will or will not support the unit and its PRESENT capabilities.

I stand by my statement that you should never buy something based on future potential capabilities.
Logged
3 x DNS-323 with 2 x 2TB WD Drives each for a total of 12 TB Storage and Backup. Running DLink Firmware v1.08 and Fonz Fun Plug (FFP) v0.5 for improved software support.

TJ

  • Level 2 Member
  • **
  • Posts: 54
Re: New firmware (1.10) release date for the DNS-323?
« Reply #145 on: March 25, 2011, 06:44:04 PM »

Today the print server stopped working. I printed successfully after my update to 1.10, but today I just can't get anything to print. I've restarted my 323, uninstalled/reinstalled the driver, nothing. I also notice there is no "clear print queue" button in the UI.  ???
Logged

HSishi

  • Level 2 Member
  • **
  • Posts: 73
Re: New firmware (1.10) release date for the DNS-323?
« Reply #146 on: March 26, 2011, 12:17:23 AM »

The "Clear Printing queue" button normally resides in Status - Device info, third section. It's visible and clickable even to me (no printer attached).

//HSishi
Logged

blackbox

  • Level 2 Member
  • **
  • Posts: 34
Re: New firmware (1.10) release date for the DNS-323?
« Reply #147 on: March 26, 2011, 01:58:55 AM »

What is the difference between 1.10 beta 05 and 1.10 beta 06?

Why don't you release 1.10 beta 06 as a beta build?
Logged

luisito_ortiz

  • Level 1 Member
  • *
  • Posts: 5
Re: New firmware (1.10) release date for the DNS-323?
« Reply #148 on: March 26, 2011, 04:49:23 AM »

Have been using this new 1.10 build since it came out with the bittorrent beta addon.  My impressions.
1.  The temperature setting to kick off the fans is too high.  I have a small fan in front of the drive going to keep the temp down.
2.  A couple of times the drive has become inaccessible and have had to reboot.  The hard drives are fine by the way.
3. The printer worked fine after the update without having to reinstall in Windows.  Not sure why people are having problems, then again I have the drive on a static IP address.
Logged

TJ

  • Level 2 Member
  • **
  • Posts: 54
Re: New firmware (1.10) release date for the DNS-323?
« Reply #149 on: March 26, 2011, 03:48:54 PM »

**sorry to those who have noticed the double-post**

Yep, I'm well aware of where it should be. I have two boxes, "MEDIA" and "DATA" on MEDIA I have no printer attached and under status:

Manufacturer:  None
Product:  None

[Clear Print Queu(s)]

But in DATA where my printer is attached USB:

Manufacturer:  Canon
Product:  MP510


... nothing else!

Will reset to factory and reload my settings. **cross fingers**

@luisito_ortiz :

my two 323's, PS3, and main pc all have reserved ips.
Logged
Pages: 1 ... 8 9 [10] 11 12 ... 16