• September 20, 2019, 09:58:13 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR-655 dose not accept change setting after first time install  (Read 3486 times)

retho

  • Level 1 Member
  • *
  • Posts: 2

After first time install and save I can not save changed settings. I have tried different things like change DHCP IP Address Range or set Admin password. Nothing of this is saved.
After I click Save Setting Button the network will be broken for short time, then it is renewed and I can login web interface again. but nothing has changed, the same DHCP IP Address Range as before, Admin password still blank.

What's wrong with this router?

The only way I can change for example the DHCP IP Address Range is to reset the router to defaults and then made the changes!
« Last Edit: June 07, 2010, 02:05:49 AM by retho »
Logged

b!3n3n3b3r

  • Level 1 Member
  • *
  • Posts: 15
Re: DIR-655 dose not accept change setting after first time install
« Reply #1 on: June 07, 2010, 10:45:46 AM »

Hey retho,

which firmware do you use?

The behaviour, you described, is a well known issue of the 1.21EU firmware. In this case, you should upgrade the fw with the neweset european one.
Logged

retho

  • Level 1 Member
  • *
  • Posts: 2
Re: DIR-655 dose not accept change setting after first time install
« Reply #2 on: June 18, 2010, 12:53:54 AM »

It was the firmware 1.21, original as buyed.
Now I've update to DIR-655_fw_reva_132EUb01_ALL_multi_20100210 and this solve the problem.
Logged