• April 25, 2019, 06:46:16 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Testing 1.34EUb05 (LYCAN, SESCA OR MKHATRI REED) updated 10/09/02  (Read 8596 times)

kthaddock

  • Level 3 Member
  • ***
  • Posts: 263

I HAVE UPDATED TO 1.32EUb01

BUT REMOTACCESS DOESN'T WORK ON THIS VERSION, MADE BY DE-PEOPLE.
I COME TO A BLANK SIDE AND CAN READ:"Not Found" SEEMS THAT I'M CONNECTED
BUT NO FURTHER ACTION.
SAME ON HTTP(S) DIRECT OR VIA DYNDNS.
Same behavior when your session have timed out, you get "not found" Doesn't work if you try to connecting with root address.
HTTP(S) WORKS FROM WIRELESS AND LAN-SIDE. You can direct downgrade from 1.32EUb01 to 1.31EUb02, that is possitive.
I HAVE'T TESTED UPNP SO I DONT KNOW IF IT WORKS, BUT IT'S REPORTED NOT WORKING IN FORUMS:
 
DIR-655A4 release notes.
========================
http://www.d-link.de/cs/Satellite?c=Product_C&childpagename=DLinkEurope-DE%2FDLTechProduct&cid=1197319392719&p=1197318958220&packedargs=QuickLinksParentID%3D1197318958220%26locale%3D1195806663795&pagename=DLinkEurope-DE%2FDLWrapper

V1.32EUb01, 2010/02/10
1.      DWM-152/156 v1.04 new driver support. The FCS version of the 3G Adapters
 
2.      404 webpage feature. When no valid Internet link is detected a slightly
        more helpful page in English is displayed by the router.
DOESN'T WORK !
 

3.      12/24-hours support. Clock format to overcome previous limitations.
 
4.      HNAP security issue fixed.

         This the official release version for product.


I HAVE REALY GOOD PATIENCE BUT THIS BEHAVIOR REPETED TIME AFTER TIME.

RGS
KTHADDOCK
« Last Edit: September 02, 2010, 01:35:45 AM by kthaddock »
Logged
ASUS RT-N16  FW: DD-WRT v24 17140-vpn M NEWD-2 K2.6 -kong.
DIR-655 H/W: A3 FW: 1.31EUB02 This FW is working !
Never argue with a burk. They drag you down to their level and then beat you with experience
Di-624+ FW: 2.10

EddieZ

  • Level 10 Member
  • *****
  • Posts: 2495
Re: Testing 1.32EUb01 (LYCAN OR SESCA REED)
« Reply #1 on: May 30, 2010, 04:42:10 AM »

Looking at the urgency you seem to contribute to this, it might be very useful to not only state your problem but also let all know which local configs (modem?) you've investigated.

Because 9/10 times not being able to connect from the outside is caused by the modem-router connection. If you do not already rule that out you send the Dlink people out on a wild goose chase  :P
Logged
DIR-655 H/W: A2 FW: 1.33

oranjevko

  • Level 1 Member
  • *
  • Posts: 15
Re: Testing 1.32EUb01 (LYCAN, SESCA OR MKHATRI REED) updated 10/05/05
« Reply #2 on: June 10, 2010, 10:58:08 AM »

kthaddock is right remote access just doesn't work no matter what the modem or else... and this is the firmware which was out just 3-4 months ago... that's a shame.

so what? is a new fully-working firmware going to be out soon?
« Last Edit: June 10, 2010, 11:27:30 PM by oranjevko »
Logged

kthaddock

  • Level 3 Member
  • ***
  • Posts: 263
Re: Testing 1.32EUb01 (LYCAN, SESCA OR MKHATRI REED) updated 10/09/02
« Reply #3 on: August 28, 2010, 11:00:39 AM »

I HAVE UPDATED TO 1.32EUb01

BUT REMOTACCESS DOESN'T WORK ON THIS VERSION, MADE BY DE-PEOPLE.
I COME TO A BLANK SIDE AND CAN READ:"Not Found" SEEMS THAT I'M CONNECTED
BUT NO FURTHER ACTION.
SAME ON HTTP(S) DIRECT OR VIA DYNDNS.
Same behavior when your session have timed out, you get "not found" Doesn't work if you try to connecting with root address.
HTTP(S) WORKS FROM WIRELESS AND LAN-SIDE. You can direct downgrade from 1.32EUb01 to 1.31EUb02, that is possitive.
I HAVE'T TESTED UPNP SO I DONT KNOW IF IT WORKS, BUT IT'S REPORTED NOT WORKING IN FORUMS:
 
DIR-655A4 release notes.
========================
http://www.d-link.de/cs/Satellite?c=Product_C&childpagename=DLinkEurope-DE%2FDLTechProduct&cid=1197319392719&p=1197318958220&packedargs=QuickLinksParentID%3D1197318958220%26locale%3D1195806663795&pagename=DLinkEurope-DE%2FDLWrapper

V1.32EUb01, 2010/02/10
1.      DWM-152/156 v1.04 new driver support. The FCS version of the 3G Adapters
 
2.      404 webpage feature. When no valid Internet link is detected a slightly
        more helpful page in English is displayed by the router.
DOESN'T WORK !
 

3.      12/24-hours support. Clock format to overcome previous limitations.
 
4.      HNAP security issue fixed.

         This the official release version for product.


I HAVE REALY GOOD PATIENCE BUT THIS BEHAVIOR REPETED TIME AFTER TIME.

RGS
KTHADDOCK



I HAVE UPDATED TO 1.34EUb05
I HAVE TESTED THIS ALOT " DON'T USE THIS SH*IT !!!!"
Seems that programmers Matt and Jerry CAN'T program. If you look back on erlier versions that doesen't work they are involved. 1.31EUb02 from France is very good and working !. Give France programmers possibility to save d-links arse.

Remote management doesn’t work
1.34EUb05 from here

From LAN-side and wi-fi  http and https work.

From WAN side only http working and https reporting “NotFound”

When you try to save setting on Administrator Settings you have to write your admin password again.
Functions on that side need to be debugged, I’t happend strange things wich I don’t couldent test.

When you enable HTTPS and try to connect from WAN side you get error message: wrongkod: ssl_error_rx_record_too_long

Traffic Statistics seem to doesen't work. LAN Statistics=>seems to work !  WAN Statistics
and Wireless Statistics=>seems to work ! only show sent and recived, nothing else.

When you have reboted dir-655 the you don't have webaccess anymore, have to login through 192.168.0.1 and after that you can access http !

This Firmware tok my ISP-network down today and my other services behind my switch died.
THIS FIRMWARE IS A DISASTER, I HAVE NEVER GOT A FW WOH TAKE ISP DOWN !!!

I haven’t tested UpnP so I don’t know it’s working.

ver1.34EUb05Beta, 2010/07/12, Matt
1. Ubicom SDK 7.6.1 build 179, 2010, Jul 12, UBICOM_7_6_1_B0179
2. Checksum: 0x0434D3D9  
Problems Resolved:
1. Fix the Remote Management function doesn't work. “ SEEMS TO BE A BIG PROBLEM”
ver1.34EUb04Beta, 2010/07/05, Jerry
1. Ubicom SDK 7.6.1 build 177, 2010, Jun 22, UBICOM_7_6_1_B0177
2. Checksum: 0x0434FFD2  
Problems Resolved:
1. Fix the Remote Management function doesn't work. “ SEEMS TO BE A BIG PROBLEM

RGS
KTHADDOCK
« Last Edit: September 05, 2010, 03:45:15 AM by kthaddock »
Logged
ASUS RT-N16  FW: DD-WRT v24 17140-vpn M NEWD-2 K2.6 -kong.
DIR-655 H/W: A3 FW: 1.31EUB02 This FW is working !
Never argue with a burk. They drag you down to their level and then beat you with experience
Di-624+ FW: 2.10