• September 17, 2019, 07:36:42 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 2 [3]

Author Topic: DAP-1360 drops connection  (Read 84866 times)

JollyJamma

  • Level 1 Member
  • *
  • Posts: 1
Re: DAP-1360 drops connection
« Reply #30 on: October 06, 2014, 02:50:07 AM »

Hi all
I seem to have fixed this by selecting manual IP address in the network settings, changing the IP address of both the DAP 1360 units to the same IP address as the rest of the network and then going back to an dynamic IP address.

Here are the network settings;
TP link 8840 modem: DHCP enabled 192.168.1.1
DAp1360 dynamic IP address 192.168.1.2 connected to the TP link via a LAN cable, in access point wireless mode.
DAP 1360 dynamic IP address 192.168.1.3 repeater mode.

Force both units to a manual IP address that matches your IP range for your network and then return to dynamic mode.

Hope this helps. The clue was when the previous poster mentioned that you needed to clone the MAC address. This forces the address of the unit rather than letting it choose it's own, something that can affect a subnet unit that has the incorrect subnet mask or IP address range. The units can't communicate because they aren't on the same IP address range and thus they drop the communication which would explain the above problems we were all experiencing.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47755
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DAP-1360 drops connection
« Reply #31 on: October 06, 2014, 07:42:38 AM »

Thank you for the feed back and information on a old thread. I hope this helps users in the future going forward.

Please visit again.  ;)
Hi all
I seem to have fixed this by selecting manual IP address in the network settings, changing the IP address of both the DAP 1360 units to the same IP address as the rest of the network and then going back to an dynamic IP address.

Here are the network settings;
TP link 8840 modem: DHCP enabled 192.168.1.1
DAp1360 dynamic IP address 192.168.1.2 connected to the TP link via a LAN cable, in access point wireless mode.
DAP 1360 dynamic IP address 192.168.1.3 repeater mode.

Force both units to a manual IP address that matches your IP range for your network and then return to dynamic mode.

Hope this helps. The clue was when the previous poster mentioned that you needed to clone the MAC address. This forces the address of the unit rather than letting it choose it's own, something that can affect a subnet unit that has the incorrect subnet mask or IP address range. The units can't communicate because they aren't on the same IP address range and thus they drop the communication which would explain the above problems we were all experiencing.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

klumpF

  • Level 1 Member
  • *
  • Posts: 6
Re: DAP-1360 drops connection
« Reply #32 on: February 17, 2015, 05:16:27 AM »

Buying this Router was definitly a mistake for me.
In addition to the UI issue here : http://forums.dlink.com/index.php?topic=61931.0

I'm also suffering from very frequent and regular disconnections.
No Internet disconnections, my modem is working well, but WiFi signal disconnections, see below (DAP1360 in green)


DAP-1360
HW F1 - SW 6.05
Region : MEA
Usage : Access Point

Already reset/reimage the router, and obviously I'm just next to it.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47755
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DAP-1360 drops connection
« Reply #33 on: February 17, 2015, 09:32:26 AM »

FYI, this model unit is not a ROUTER, it's a Access Point class device. Please post your information in your threat please:
http://forums.dlink.com/index.php?topic=61931.0

Buying this Router was definitly a mistake for me.
In addition to the UI issue here : http://forums.dlink.com/index.php?topic=61931.0

I'm also suffering from very frequent and regular disconnections.
No Internet disconnections, my modem is working well, but WiFi signal disconnections, see below (DAP1360 in green)


DAP-1360
HW F1 - SW 6.05
Region : MEA
Usage : Access Point

Already reset/reimage the router, and obviously I'm just next to it.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

DennisOlof1

  • Level 2 Member
  • **
  • Posts: 83
Re: DAP-1360 drops connection
« Reply #34 on: March 14, 2015, 01:15:13 PM »

jeason, hmm, this shows that HW_A1 does have a firmware update to v1.10b08 and that might fix your problem ?

http://support.dlink.com/ProductInfo.aspx?m=DAP-1360

« Last Edit: March 14, 2015, 03:16:42 PM by FurryNutz »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47755
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DAP-1360 drops connection
« Reply #35 on: March 31, 2015, 08:41:47 AM »

Any status on this?  ???

Buying this Router was definitly a mistake for me.
In addition to the UI issue here : http://forums.dlink.com/index.php?topic=61931.0

I'm also suffering from very frequent and regular disconnections.
No Internet disconnections, my modem is working well, but WiFi signal disconnections, see below (DAP1360 in green)


DAP-1360
HW F1 - SW 6.05
Region : MEA
Usage : Access Point

Already reset/reimage the router, and obviously I'm just next to it.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting
Pages: 1 2 [3]