Configure your objects firstly with the details from the ISP. 
Wan1_IP = static IP supplied.
Wan1_GW = Supplied. (usually this will be in most cases 1 below your static.). eg, IP=192.168.1.2--gw - 192.168.1.1
Wan1_DNS = Supplied by ISP.
Rules for outgoing traffic would be. 
1  drop_smb-all  Drop  lan  lannet  wan1  all-nets  smb-all 
2  allow_ping-outbound  NAT  lan  lannet  wan1  all-nets  ping-outbound 
3  allow_ftp-passthrough  NAT  lan  lannet  wan1  all-nets  ftp-passthrough 
4  allow_standard  NAT  lan  lannet  wan1  all-nets  all_tcpudp 
Hope this helps a little. This is the basic table defaulting on the DFL.