I just bought a new D-Link DSL-2320B DSL router to replace the junky Actiontec router that Verizon provided to me. After turning off the Actiontec router overnight, I was this morning able to connect the DSL-2320B to the DSL line and get an Internet connection when my laptop (a MacBook Pro) is connected directly to the DSL-2320B via Ethernet. The DSL-2320B is configured in Bridged mode. Interestingly - even though I have an Internet connection, the Internet light on the DSL-2320B does not light up.
I now want to connect my DIR-655 to the DSL-2320B so that can I setup a wireless network. Verizon in my area uses DHCP (Not PPPoE). I went to the DIR-655 web page at 192.168.0.1 and tried to use the Wizard to setup the connection. Verizon Online DSL is listed, but when I choose it it then auto selects PPPoE, so that won't work. I manually chose DHCP Connection. The next screen allows you to enter MAC address and DNS settings, but I expect those to be provided by DHCP so I leave them blank, and continue along to save settings and reboot the router.
I then disconnect the Ethernet cable from my computer and connect it to the Internet port on the back of the DIR-655. My MacBook Pro can connect to the wireless network, but it cannot connect to the Internet.
I then took the DNS settings that appear on my MacBook Pro when I have the DSL-2320B directly connected via Ethernet and input then into the DNS fields in the DIR-655. Saved. Rebooted. No Joy!
When I look at the WAN section of the Status page on the DIR-655 I see that it's not getting an IP address, subnet mask or gateway.
What am I missing? I feel like I'm so close to liberating myself from the bucket-of-fail that is the Actiontec router.
Am I better off getting a DSL-2640B which has built-in 802.11g? If I do, can I connect the DIR-655 to that to get 802.11n networking? If so, I'll return the DSL-2320B and get that instead.