Topic: re-connect after power lost? (Read 7389 times)

Ralph_121 · « **on:** July 12, 2017, 04:41:26 AM »

I have a D-Link DCS-2530L FHD 180 , after a power loss of 1H the camera does not re-connect to the wlan, unless someone climbs up the wall and presses the button at the rear. If pressed, the camera finds the wlan and logs in again.

Any chance that the camra does that on it's own?

Thanks!

FurryNutz · « **Reply #1 on:** July 12, 2017, 10:25:18 AM »

What region are you located?
What FW is currently loaded on the camera?

What Mfr and Model# is the main host wireless router?
What wireless modes are you using?
If you disconnect the cameras power for 5 minutes, then power back on the camera, does the same thing happen?
Set a static IP address ON the camera and see if the same thing happens. 192.168.#.25
Is uPnP and uPnP Port Forwarding enabled on the camera?

D-Link Forums

News:

Author Topic: re-connect after power lost? (Read 7389 times)

Ralph_121

re-connect after power lost?

FurryNutz

Re: re-connect after power lost?