Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[nettewurk]

This is just to collate user experience in upgrading the firmware to v. 1.12 recently released.  Hope that the previously report on unresponsive unit, erratic connection/disconnection, no video display, unable to access WebUI, and many others reported are expected to be resolved in this version.  Thanks to all upcoming feedback.

[nettewurk]

Hoorah, YOU DID IT!!!  Everything went smoothly from installation until operation.  No disconnection nor discoloration happened until this time!  Thanks!!!

[walkjp1]

Don`t do it!  I went ahead and tried this on one of my cameras. Now I cannot see it on mydlink. It keeps asking for the password. And I am not receiving emails from the camera anymore. However I can log into it on the network.  I am really interested in hearing others experience with this firmware?

[nettewurk]

Thanks for the feedback, walkjp1.  I've been using it for days and all of the functionalities seem working smoothly in my A1 SE Asian unit.  Try to report if something didn't work well.

[nettewurk]

Recently, can't connect to my 6010L and the device name shown is not the one I renamed it.  My firmware version is 1.12.  Even rebooting my router to refresh the hostname from DHCP doesn't resolve my connectivity problem.  Only option is to switch off the unit and the turn it on.  I experience this at least once a week.  Didn't encounter this to my 5222LB2, 1130L, 942L and 2136L.   Version is A1, SE Asian version connected to my DIR-880L via WiFi.  Hope to get some feedback here.  Thanks.

[walkjp1]

I`m experiencing many of the same issues. works for about 2 days. Although green tint at night.  After that, I can barely log into the camera through the network. No pictures, emails, etc.  Only thing I can do is power it off for a few minutes, then it will work again 2 or 3 days. And I forgot to mention I cannot change the camera name. Since I have 3 of these, it is irritating.

[CHICKENHEAD]

You want feedback?  This firmware is marginally better than the disaster of 1.11.   Marginally.

It is still totally unreliable, going deaf randomly on the network (and I'm using ETHERNET for god's sake) and requiring a hard power cycle EVERY DAY.

[FurryNutz]

http://forums.dlink.com/index.php?topic=62749.0

You want feedback?  This firmware is marginally better than the disaster of 1.11.   Marginally.

It is still totally unreliable, going deaf randomly on the network (and I'm using ETHERNET for god's sake) and requiring a hard power cycle EVERY DAY.

[FurryNutz]

New Firmware posted on http://support.dlink.com [follow this link]

The following are the listed fixes included in F/W v1.12.02:

1. Fixed the 2-way audio failed issue on iOS8
2. Fixed the issue of faulty auto-firmware upgrade mechanism
3. Fine-tune the wireless performance
4. Fixed the issue found no video streaming when the device was boot in low
light environment.

#3 or even #4 look like something that may help with the issue you are seeing.  Give it a try and if you care... feedback the community.  Thanks