Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[alittlespace]

I am in Malaysia. After setting up DSL-2750U Wireless N ADSL2+ 4-Port, all the pc or notebooks connected directly to the 4 ports can access the internet.

If I set wifi security to OPEN, all my notebooks can connect through wi-fi to the internet
However, when I set security to WEP (128-bit), none of my notebooks can connect through wi-fi.
I tried changing 802.11 mode and Channel numbers. Still no connection.

Can anyone help? Thanks.

[FurryNutz]

Try WPA or WPA2? WEP might not be supported by your connecting client devices.
Contact your regional local DLink support office for further assistance.

[alittlespace]

Thanks. I used a friend's DSL-2640B Wireless F ADFSL2_ Router using the same WEP. All connect fine! I am trying to find the DLink support in Malaysia.

[2750E Newbie]

I am the same problem with the 2570E modem. If I disabled all wifi password, then all my devices are able to discover the SSID and connect to the modem.

In my cae I also use WEP setting. The strange thing is on the 1st day after i setup the 2570E modem, all my devices can connect to it via wifi just fine. On 2nd day, only the notebook PC that I used to setup the modem can connect to it via wifi.

[FurryNutz]

Sounds like you should phone contact D-Link support for your region and inquire about this. Let us know how it goes.

I am the same problem with the 2570E modem. If I disabled all wifi password, then all my devices are able to discover the SSID and connect to the modem.

In my cae I also use WEP setting. The strange thing is on the 1st day after i setup the 2570E modem, all my devices can connect to it via wifi just fine. On 2nd day, only the notebook PC that I used to setup the modem can connect to it via wifi.