Topic: After Firmware upgrade to 1.1-2729 no config menu only one screen, ?? (Read 5343 times)

Fredddd · « **on:** August 19, 2013, 11:13:42 PM »

Hi,
After the firmware upgrade I still get emails, can stream but no access to the setup screen the only screen I get is this one

I did not reset the cam after Firmware upgrade! I was afraid to miss all confirguration then.

Only change it is set to dhcp my fixed ip is gone, but port settings stayed the same! Funny!

Any suggestions? What is that screen?

Thank you!
Fredddd

Fredddd · « **Reply #1 on:** August 20, 2013, 04:07:01 AM »

Ok, it seems with a mobile device you can' t anymore configure the device!

RYAT3 · « **Reply #2 on:** August 20, 2013, 07:16:48 PM »

Quote from: Fredddd on August 20, 2013, 04:07:01 AM

Ok, it seems with a mobile device you can' t anymore configure the device!

Try using another web browser on that pad.

Allen · « **Reply #3 on:** August 21, 2013, 03:51:33 AM »

This is the design issue.
When you use mobile device to access IP Camera's IP addresss, the browser will be re-direct to the webpage as you found.

Acumen · « **Reply #4 on:** August 28, 2013, 12:34:39 PM »

Try to switch user agent (of the browser supports it) or another device then a pad

D-Link Forums

News:

Author Topic: After Firmware upgrade to 1.1-2729 no config menu only one screen, ?? (Read 5343 times)

Fredddd

After Firmware upgrade to 1.1-2729 no config menu only one screen, ??

Fredddd

Re: After Firmware upgrade to 1.1-2729 no config menu only one screen, ??

RYAT3

Re: After Firmware upgrade to 1.1-2729 no config menu only one screen, ??

Allen

Re: After Firmware upgrade to 1.1-2729 no config menu only one screen, ??

Acumen

Re: After Firmware upgrade to 1.1-2729 no config menu only one screen, ??