• August 19, 2019, 07:22:31 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 ... 10 11 [12]

Author Topic: DIR-880L DHCP failure in Bridge mode?  (Read 9636 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47689
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L DHCP failure in Bridge mode?
« Reply #165 on: April 22, 2019, 07:18:29 AM »

Does v1.21 have this fix included?  ??? I saw there was a recent v1.21 posted...

"I got a beta for this issue Scan" Huh?  ???

7 months later....I got a beta for this issue Scan

ftp://FTP2.DLINK.COM/PRODUCTS/DIR-880L/REVA/DIR-880L_REVA_FIRMWARE_v1.20B01_BETA02.zip
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

GreenBay42

  • Administrator
  • Level 10 Member
  • *
  • Posts: 2141
Re: DIR-880L DHCP failure in Bridge mode?
« Reply #166 on: April 22, 2019, 07:23:34 AM »

I do not know. I am sure the beta is based off the older file and does not include the 1.21 fixes.

scan = the OP scan80269
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47689
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L DHCP failure in Bridge mode?
« Reply #167 on: April 22, 2019, 07:28:04 AM »

Ok. Would be nice if these could be all inclusive.

I'll load mine up and test this out... ;)
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47689
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L DHCP failure in Bridge mode?
« Reply #168 on: April 23, 2019, 03:52:46 PM »

Ok, updated to this version of FW. Will leave it online and check to see if I lose internet or not in wireless bridge mode.
Firmware External Version : V1.20
Firmware Internal Version : V1.20B01_20190412_BETA02
Date : 12, Apr, 2019
CheckSum : 39203139
2.4GHz regulation domain : NA
  1,2,3,4,5,6,7,8,9,10,11
5GHz country code : NA/US
  36,40,44,48,149,153,157,161,165
5GHz DFS Channel :
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47689
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L DHCP failure in Bridge mode?
« Reply #169 on: April 26, 2019, 08:21:40 PM »

Well I don't think this version FW fixes this issue. I was just sitting at my PC doing forums stuff, browsing and then I closed my browser down and looked down and noticed that my network icon on Windows 7 had a yellow exclamation on it. I pinged the router and it failed. I pinged the last known IP address that the 880L had in bridge mode and it was responding. I was able to access the 880Ls web page. I checked with a Mac Book Pro 2008 connected to the main host router and pinged the 880L from that side and it also failed. I unplugged the wired PC connected to the 880L and back in and it failed to get a IP address from the router.

I rebooted the 880L and now everything is back to working again.

I'll be putting a COVR-1203 online tomorrow and will retest the 880L again.

7 months later....I got a beta for this issue Scan

ftp://FTP2.DLINK.COM/PRODUCTS/DIR-880L/REVA/DIR-880L_REVA_FIRMWARE_v1.20B01_BETA02.zip
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

jslenterprises

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-880L DHCP failure in Bridge mode?
« Reply #170 on: August 13, 2019, 03:28:56 PM »

In Router mode, if you attempt to login to mydlink on the router, it will also kill DHCP.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47689
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L DHCP failure in Bridge mode?
« Reply #171 on: August 13, 2019, 03:34:44 PM »

I haven't seen this issue in router mode.
What version of FW are you using?

In Router mode, if you attempt to login to mydlink on the router, it will also kill DHCP.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

jslenterprises

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-880L DHCP failure in Bridge mode?
« Reply #172 on: August 13, 2019, 03:55:37 PM »

it did this in b02-i3se, b02-icl9 and even the b01-beta2 you were investigating above. This is with a saved config, and freshly reset, unconfigured router (no wifi, just physical lan - signing into mydlink will cause dhcp to break.

I almost think there is a syntax error or expected field mismatch created in the config when you save any settings after you've signed into mydlink on the router.

1.08b06 was the last firmware to work without any glaring issues.
« Last Edit: August 13, 2019, 04:56:01 PM by jslenterprises »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47689
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L DHCP failure in Bridge mode?
« Reply #173 on: August 14, 2019, 06:14:08 AM »

Where are you signing into mydlink?

What happens if the router is not associated with mydlink?

I guess over all, users will need to be careful. This only seems to effect wireless bridge mode. User can either use v1.08 or v1.20. The router is EOL. Users can also check into DD-WRT FW as well.

it did this in b02-i3se, b02-icl9 and even the b01-beta2 you were investigating above. This is with a saved config, and freshly reset, unconfigured router (no wifi, just physical lan - signing into mydlink will cause dhcp to break.

I almost think there is a syntax error or expected field mismatch created in the config when you save any settings after you've signed into mydlink on the router.

1.08b06 was the last firmware to work without any glaring issues.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting
Pages: 1 ... 10 11 [12]