• August 25, 2019, 06:27:24 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 343 not detecting volume after hard reset  (Read 1895 times)

burstyourbubble

  • Level 1 Member
  • *
  • Posts: 1
343 not detecting volume after hard reset
« on: January 04, 2018, 12:46:02 PM »

Hi,

I'm currently in the process of expanding storage on a 343.

OS on connected machines is Mac OSX.

Our unit has 2x2TB drives installed in what I assume is RAID 1 (as our max storage was 2TB). I plugged in two more, brand-new 2TB drives.

The admin who setup the DNS-343 is long gone and with him the password as well as anyone with networking/drive knowledge. I hard reset the device to access the config panel. Volume 1 is no longer showing and with it 2TB of data dating years back is inaccessible.

I installed fw 1.05 in hopes the drives would become visible again and they have not.

I have avoided trying any type of formatting with the full disks inside, instead having removed them and started to format the new drives in order to attempt this solution: http://forums.dlink.com/index.php?topic=6473.msg50413#msg50413

Is this the correct way to resolve this? Do I have any out-of-the-box options to reconfigure and access those old drives and their information?

At this point, is it a better idea to contact a professional recovery service?
« Last Edit: January 04, 2018, 09:10:26 PM by burstyourbubble »
Logged

dsttamal

  • Level 1 Member
  • *
  • Posts: 3
Re: 343 not detecting volume after hard reset
« Reply #1 on: August 03, 2019, 05:33:14 PM »

Solved?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47713
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 343 not detecting volume after hard reset
« Reply #2 on: August 05, 2019, 08:36:34 AM »

Any progress on this?

Hi,

I'm currently in the process of expanding storage on a 343.

OS on connected machines is Mac OSX.

Our unit has 2x2TB drives installed in what I assume is RAID 1 (as our max storage was 2TB). I plugged in two more, brand-new 2TB drives.

The admin who setup the DNS-343 is long gone and with him the password as well as anyone with networking/drive knowledge. I hard reset the device to access the config panel. Volume 1 is no longer showing and with it 2TB of data dating years back is inaccessible.

I installed fw 1.05 in hopes the drives would become visible again and they have not.

I have avoided trying any type of formatting with the full disks inside, instead having removed them and started to format the new drives in order to attempt this solution: http://forums.dlink.com/index.php?topic=6473.msg50413#msg50413

Is this the correct way to resolve this? Do I have any out-of-the-box options to reconfigure and access those old drives and their information?

At this point, is it a better idea to contact a professional recovery service?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting