• June 16, 2019, 01:28:59 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DAP-1520 Configuration  (Read 2399 times)

DougD

  • Level 1 Member
  • *
  • Posts: 1
DAP-1520 Configuration
« on: December 26, 2017, 08:34:11 AM »

I am setting up a DAP-1520 and have paired with my router.  The extender configuration page asks for a password (which the manual says is blank) but will not accept it.  Is there a way around this.
Thanks,
Doug
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47447
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DAP-1520 Configuration
« Reply #1 on: December 26, 2017, 08:41:45 AM »

Link>Welcome!

  • What Hardware version is your DAP? Look at the sticker under the DAP.
  • Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
  • What region are you located?

What browser are you using? Try IE11 or FF.
Be sure to clear all browser caches, exit the browser then connect to the IP address of the DAP.
Are you sure you didn't already set a PW on the DAP?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting