D-Link Wireless Access Points For Business > DAP-2360

Home-Network connection prob with DAP-2360 Rev. B1


I've already running 2 other DAP-2360 in my home network and now trying to connect another AP.
The 2360 has the latest firmware and I was able to connect/configure with my notebook.
Prior to the f/w, I've been resetting the box completely, with login: admin/blank.
Then I opened the basic settings to choose "get IP from DHCP" (from my Fritz 7490 router) and was able to SAVE this setting.
Then I directly confirmed again with "SAVE config" from the top level navigation.
After 60s, I entered the GUI again and this setting has not been saved (it was static IP again). Why?


* What Hardware version is your DAP? Look at the sticker under the DAP.
* Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
* What region are you located?
What browser are you using? Try IE11 or FF.

thx, found the problem. Cable was defect. Replaced and everything  works fine now. With same SSID and wpa password for all 3 devices. Channels 1, 7 and 13. Have a good day

Glad you found the problem.


[0] Message Index

Go to full version