• October 22, 2019, 10:45:01 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Persistent wrong password  (Read 1906 times)

CalJake47

  • Level 1 Member
  • *
  • Posts: 2
Persistent wrong password
« on: November 04, 2016, 11:40:51 PM »

Wow this is frustrating.  Updated from firmware 1.05 to 1.07ww.  I do a factory reset, and it takes me through the set-up wizard.  I change the password.  I modify all my setting as desired, all seems fine.  However, once I exit, I cannot log back in with the password I've just created:  "Invalid password, please try again."  Factory reset, go through the entire process again, same result.  I've done this several times.  This is not a very fun way to spend a Friday night.  This is with Firefox 49.02 with all extensions and add-ons disabled.  Any suggestions? 
Logged

CalJake47

  • Level 1 Member
  • *
  • Posts: 2
Re: Persistent wrong password
« Reply #1 on: November 05, 2016, 06:01:04 PM »

OK, after seeing a post by square_eyes with a password problem with this firmware version, I step-by-step built a password.  I started with a simple, 8-alpha characters only password and could log-in.  I then added numbers and additional characters two at a time, logging out and in each change to ensure I could still log in.  I've now built up a suitably strong password.  Hope this helps someone else if they encounter the problem.

FWIW, I also contacted D-link support and got a reply within 12 hours; it eventually went to a 'please call this number,' which I didn't follow through on.
« Last Edit: November 05, 2016, 06:03:04 PM by CalJake47 »
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2110
Re: Persistent wrong password
« Reply #2 on: November 05, 2016, 08:53:25 PM »


So, Did you find some characters that did not work?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47844
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Persistent wrong password
« Reply #3 on: November 06, 2016, 11:11:08 AM »

Welcome!

What is the length of your router PW and what special characters are you using?

You can also upgrade to v1.08WW as well.


OK, after seeing a post by square_eyes with a password problem with this firmware version, I step-by-step built a password.  I started with a simple, 8-alpha characters only password and could log-in.  I then added numbers and additional characters two at a time, logging out and in each change to ensure I could still log in.  I've now built up a suitably strong password.  Hope this helps someone else if they encounter the problem.

FWIW, I also contacted D-link support and got a reply within 12 hours; it eventually went to a 'please call this number,' which I didn't follow through on.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting