The Graveyard - Products No Longer Supported > EBR-2310

EBR-2310 Lan Parameter

(1/5) > >>

I've got an EBR-2310 with 2.01 firmware.
Whenever I try to change the LAN parameter from to something like and then save it.
I cannot access the router using the new IP address I assigned.

In order to connect again, I must default the router.
Any solutions ?



* What region are you located?
* Are you wired or wireless connected to the router?
Internet Service Provider and Modem Configurations

* What ISP Service do you have? Cable or DSL?
* What ISP Modem Mfr. and model # do you have?
Are you changing the IP address of the router while it's not connected to the ISP modem?

PC 3rd Party Security Software Configurations

* Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
* Turn off all devices accept for one wired LAN PC while testing.
* Disable any downloading client software managers, i.e. Torrents or similar.

PC Web Browser Configurations
What browser are you using?
Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the Admin account on the router.
Try turning off these features in Chrome:
Top right corner, little bars for options > Settings > Settings (on left) > Show advanced settings.
Uncheck these:
Use a web service to help resolve navigation errors
Use a prediction service to help complete searches and URLs typed in the address bar
Predict network actions to improve page load performance
Enable phishing and malware protection

I'm using IE 11
We are wired.
Located in upstate New York.
We do these routinely to set up routers for customers.

We're setting these up while NOT connected to an ISP.  Just a laptop and the router.
I will try turning of firewalls and AV but I don't think that's the issue.

I did another one this morning, the same way, for another customer and it worked fine.

Will let you know.


You may want to try reloading the FW using the following process, factory reset, reload FW, factory reset then set up from scratch and test.

Ya the 2310 is getting old now. Try setting the compatibility mode in IE as we have seen some browser issues with older routers.

You may want to have a look at the DIR series, maybe a 636L, 655, 810L, 820L, or 830L for something newer as a suggestion.

Let us know how it goes.

Did as you change.
Once the LAN IP is changed, you can't connect to the router.


[0] Message Index

[#] Next page

Go to full version