D-Link Wireless Access Points For Business > DAP-2360

Dynamic VLAN assignment on DAP-2360

(1/3) > >>

Hello All,

I want to perform the dynamic VLAN assignment on my network using 802.1x therefore I get two access points DAP-3310 et DAP-2360 and one RADIUS server. I did the required configuration but it is not working.

Please help me to realize this configuration, and which RADIUS server is preferable to use with D-Link devices

Best regards


* What Hardware version is your DAPs? Look at sticker under the DAPs.
* Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
* What region are you located?
Is there any information with in the User Manuals to help with this?

If not, I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

Thank you for your response

Unfortunately there is nothing important concerning this point in the manual.

Ok I will call the regional support office and I will let you know the results.

Best regards.

Let us know how it goes...

Hi everybody,

Yes, DAP-2360 supports dynamic Vlan. It is working on all RADIUS solution as long as it follows RFC standard , in my case I used NPS Network Policy Server of Windows server 2008.

a. Wireless Security

b. VLAN Setting

c. NPS
-tunnel medium type: (802.1x)
-tunnel pvt group id: (Vlan ID)
-tunnel type : (VLAN)

d. Switch config:
Include all the configured Vlan on the ports connecting to the AP  ( eg.  Vlan-1 tagged ; Vlan-2,3,4 Tagged ).

Best regards.


[0] Message Index

[#] Next page

Go to full version