• April 19, 2019, 03:42:13 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Cannot get Internet connection with UML290  (Read 12744 times)

Hammer7

  • Level 1 Member
  • *
  • Posts: 7
Cannot get Internet connection with UML290
« on: May 15, 2014, 06:28:26 PM »

My Pantech UML290 is on the supported USB modems list, but it doesn't connect to the Internet.  It just keeps saying "connecting" on the status page.  I tried with Firmware 2.15 (though I am going to try with firmware 2.13).

Any tips to get this to work?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47208
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Cannot get Internet connection with UML290
« Reply #1 on: May 15, 2014, 06:31:39 PM »

Link>Welcome!

  • What region are you located?
  • Was a Factory Reset performed before and after any firmware updates then set up from scratch?
FW Update Process
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

Hammer7

  • Level 1 Member
  • *
  • Posts: 7
Re: Cannot get Internet connection with UML290
« Reply #2 on: May 15, 2014, 06:37:36 PM »

Thanks!

I am in the United States.

I did not perform a factory reset, though moving from 2.15 to 2.13 may have done the trick, as it reset my settings.
Logged

Hammer7

  • Level 1 Member
  • *
  • Posts: 7
Re: Cannot get Internet connection with UML290
« Reply #3 on: May 15, 2014, 06:40:01 PM »

Hmm... 2.13 doesn't seem to have the 3G/4G Modem options...
Logged

Hammer7

  • Level 1 Member
  • *
  • Posts: 7
Re: Cannot get Internet connection with UML290
« Reply #4 on: May 15, 2014, 07:15:11 PM »

I moved back to 2.15 since 2.13 doesn't have the 3G/4G modem option and I ran into some bug where it wouldn't let me log in to the admin panel.
Logged

Hammer7

  • Level 1 Member
  • *
  • Posts: 7
Re: Cannot get Internet connection with UML290
« Reply #5 on: May 15, 2014, 08:20:18 PM »

I did the factory reset and then reconfigured for 3G/4G access.

This is the D-Link Pocket Cloud Router, H/W version A2.

The loaded firmware is 20130708_D-Link_DIR-506L_V2.15b02.bin from DIR-506L_fw_revA2_2-15B02_all_en_20130819.zip.

The signal strength looks good.

This is my 4G card: http://www.pantechusa.com/modems/fourg-usb-modem/

Here is part of the log:

Dec 31 16:59:58 kernel: klogd started: BusyBox v1.3.2 (2013-01-21 09:46:34 CST)
Dec 31 17:00:00 BEID: BEID STATUS  : 0 , STATUS OK!
Dec 31 17:00:00 commander: Ethernet port configuration: Configured as WAN
Dec 31 17:00:02 syslog: Failure parsing line 12 of /etc/udhcpd.conf
Dec 31 17:00:02 syslog: server_config.pool_check = 1
Dec 31 17:00:02 syslog:  start = 192.168.0, end = 192.168.0, lan_ip = 192.168.0, interface=br0, ifindex=0
Dec 31 17:00:02 udhcpd[1127]: udhcpd (v0.9.9-pre) started
Dec 31 17:00:07 commander: Init NAT Server ...
Dec 31 17:00:12 syslog: ===============================================
Dec 31 17:00:12 syslog: family_member = 6E21
<redacted>
Dec 31 17:00:12 syslog: ===============================================
Dec 31 17:00:13 iChecksum:: ===============================================
Dec 31 17:00:13 iChecksum:: family_member = 6E21
<redacted>
Dec 31 17:00:13 iChecksum:: ===============================================
Dec 31 17:00:15 init: Starting pid 2307, console /dev/ttyS1: '/bin/ash'
Dec 31 17:00:16 commander: STOP WANTYPE 3G
Dec 31 17:00:17 commander: Enter Power Saving Mode
Dec 31 17:00:17 commander: Start SharePort
Dec 31 17:00:30 commander: AutoSel Ethernet Port: Configured as LAN
Dec 31 17:02:48 commander: Exit Power Saving Mode
Dec 31 17:04:50 O3G/hotplug: 3G modem VendorID=106c ProductID=3718
Dec 31 17:05:08 O3G/hotplug: check setting!!
Dec 31 17:05:27 O3G/auto_apn: Cannot get mcc .NO support autoapn!!
Dec 31 17:05:27 <redacted, just in case>
Dec 31 17:05:30 commander: START WANTYPE 3G
Dec 31 17:05:40 pppd[17523]: pppd 2.4.4 started by root, uid 0
Dec 31 17:05:40 chat[17528]: abort on (BUSY)
Dec 31 17:05:40 chat[17528]: abort on (NO CARRIER)
Dec 31 17:05:40 chat[17528]: abort on (ERROR)
Dec 31 17:05:40 chat[17528]: timeout set to 10 seconds
Dec 31 17:05:40 chat[17528]: send (AT^M)
Dec 31 17:05:40 chat[17528]: expect (OK)
Dec 31 17:05:40 chat[17528]: ^M
Dec 31 17:05:40 chat[17528]: OK
Dec 31 17:05:40 chat[17528]:  -- got it
Dec 31 17:05:40 chat[17528]: send (ATD*99#^M)
Dec 31 17:05:40 chat[17528]: expect (CONNECT)
Dec 31 17:05:40 chat[17528]: ^M
Dec 31 17:05:40 chat[17528]: ^M
Dec 31 17:05:40 chat[17528]: NO CARRIER
Dec 31 17:05:40 chat[17528]:  -- failed
Dec 31 17:05:40 chat[17528]: Failed (NO CARRIER)
Dec 31 17:05:40 pppd[17523]: Connect script failed
Dec 31 17:05:40 pppd[17523]: Exit.
Dec 31 17:06:26 commander: STOP WANTYPE 3G
Dec 31 17:06:27 commander: START WANTYPE 3G
Dec 31 17:06:36 pppd[20761]: pppd 2.4.4 started by root, uid 0
Dec 31 17:06:36 chat[20765]: abort on (BUSY)
Dec 31 17:06:36 chat[20765]: abort on (NO CARRIER)
Dec 31 17:06:36 chat[20765]: abort on (ERROR)
Dec 31 17:06:36 chat[20765]: timeout set to 10 seconds
Dec 31 17:06:36 chat[20765]: send (AT^M)
Dec 31 17:06:36 chat[20765]: expect (OK)
Dec 31 17:06:36 chat[20765]: ^M
Dec 31 17:06:36 chat[20765]: OK
Dec 31 17:06:36 chat[20765]:  -- got it
Dec 31 17:06:36 chat[20765]: send (ATD*99#^M)
Dec 31 17:06:36 chat[20765]: expect (CONNECT)
Dec 31 17:06:36 chat[20765]: ^M
Dec 31 17:06:36 chat[20765]: ^M
Dec 31 17:06:36 chat[20765]: NO CARRIER
Dec 31 17:06:36 chat[20765]:  -- failed
Dec 31 17:06:36 chat[20765]: Failed (NO CARRIER)
Dec 31 17:06:36 pppd[20761]: Connect script failed
Dec 31 17:06:36 pppd[20761]: Exit.
Dec 31 17:07:22 commander: STOP WANTYPE 3G
Dec 31 17:07:23 commander: START WANTYPE 3G
Dec 31 17:07:32 pppd[24039]: pppd 2.4.4 started by root, uid 0
Dec 31 17:07:32 chat[24043]: abort on (BUSY)
Dec 31 17:07:32 chat[24043]: abort on (NO CARRIER)
Dec 31 17:07:32 chat[24043]: abort on (ERROR)
Dec 31 17:07:32 chat[24043]: timeout set to 10 seconds
Dec 31 17:07:32 chat[24043]: send (AT^M)
Dec 31 17:07:32 chat[24043]: expect (OK)
Dec 31 17:07:32 chat[24043]: ^M
Dec 31 17:07:32 chat[24043]: OK
Dec 31 17:07:32 chat[24043]:  -- got it
Dec 31 17:07:33 chat[24043]: send (ATD*99#^M)
Dec 31 17:07:33 chat[24043]: expect (CONNECT)
Dec 31 17:07:33 chat[24043]: ^M
Dec 31 17:07:33 chat[24043]: ^M
Dec 31 17:07:33 chat[24043]: NO CARRIER
Dec 31 17:07:33 chat[24043]:  -- failed
Dec 31 17:07:33 chat[24043]: Failed (NO CARRIER)
Dec 31 17:07:33 pppd[24039]: Connect script failed
Dec 31 17:07:33 pppd[24039]: Exit.
Dec 31 17:08:18 commander: STOP WANTYPE 3G
Dec 31 17:08:19 commander: START WANTYPE 3G
Dec 31 17:08:29 pppd[27326]: pppd 2.4.4 started by root, uid 0
Dec 31 17:08:29 chat[27332]: abort on (BUSY)
Dec 31 17:08:29 chat[27332]: abort on (NO CARRIER)
Dec 31 17:08:29 chat[27332]: abort on (ERROR)
Dec 31 17:08:29 chat[27332]: timeout set to 10 seconds
Dec 31 17:08:29 chat[27332]: send (AT^M)
Dec 31 17:08:29 chat[27332]: expect (OK)
Dec 31 17:08:29 chat[27332]: ^M
Dec 31 17:08:29 chat[27332]: OK
Dec 31 17:08:29 chat[27332]:  -- got it
Dec 31 17:08:29 chat[27332]: send (ATD*99#^M)
Dec 31 17:08:29 chat[27332]: expect (CONNECT)
Dec 31 17:08:29 chat[27332]: ^M
Dec 31 17:08:29 chat[27332]: ^M
Dec 31 17:08:29 chat[27332]: NO CARRIER
Dec 31 17:08:29 chat[27332]:  -- failed
Dec 31 17:08:29 chat[27332]: Failed (NO CARRIER)
Dec 31 17:08:29 pppd[27326]: Connect script failed
Dec 31 17:08:29 pppd[27326]: Exit.
Logged

Hammer7

  • Level 1 Member
  • *
  • Posts: 7
Re: Cannot get Internet connection with UML290
« Reply #6 on: May 15, 2014, 09:11:31 PM »

If I enter the Manual Internet Connection Setup, I can change the dial-up profile to Manual.  I've tried different things here.

I've tried the combinations of CDMA2000/EV-DO and WCDMA/HSPA, without APN and also with APN set to "vzwinternet".

Without APN, I get the following:

Dec 31 17:00:14 init: Starting pid 2307, console /dev/ttyS1: '/bin/ash'
Dec 31 17:00:15 commander: STOP WANTYPE 3G
Dec 31 17:00:16 commander: Enter Power Saving Mode
Dec 31 17:00:16 commander: Start SharePort
Dec 31 17:00:28 O3G/hotplug: 3G modem VendorID=106c ProductID=3718
Dec 31 17:00:28 commander: AutoSel Ethernet Port: Configured as LAN
Dec 31 17:00:47 O3G/hotplug: check setting!!
Dec 31 17:00:49 O3G/hotplug: THIS IS EVDO MODEM CARD!!
Dec 31 17:00:51 commander: Exit Power Saving Mode
Dec 31 17:00:55 O3G/auto_apn: Dial-up profile is manual
Dec 31 17:00:57 commander: START WANTYPE 3G
Dec 31 17:01:07 pppd[5905]: pppd 2.4.4 started by root, uid 0
Dec 31 17:01:07 chat[5933]: abort on (BUSY)
Dec 31 17:01:07 chat[5933]: abort on (NO CARRIER)
Dec 31 17:01:07 chat[5933]: abort on (ERROR)
Dec 31 17:01:07 chat[5933]: timeout set to 10 seconds
Dec 31 17:01:07 chat[5933]: send (AT^M)
Dec 31 17:01:08 chat[5933]: expect (OK)
Dec 31 17:01:08 chat[5933]: AT^M^M
Dec 31 17:01:08 chat[5933]: OK
Dec 31 17:01:08 chat[5933]:  -- got it
Dec 31 17:01:08 chat[5933]: send (ATD*99#^M)
Dec 31 17:01:08 chat[5933]: expect (CONNECT)
Dec 31 17:01:08 chat[5933]: ^M
Dec 31 17:01:08 chat[5933]: ATD*99#^M^M
Dec 31 17:01:08 chat[5933]: NO CARRIER
Dec 31 17:01:08 chat[5933]:  -- failed
Dec 31 17:01:08 chat[5933]: Failed (NO CARRIER)
Dec 31 17:01:08 pppd[5905]: Connect script failed
Dec 31 17:01:08 pppd[5905]: Exit.

With APN, I get the following:

Dec 31 17:00:15 commander: STOP WANTYPE 3G
Dec 31 17:00:16 commander: Enter Power Saving Mode
Dec 31 17:00:16 commander: Start SharePort
Dec 31 17:00:23 commander: Exit Power Saving Mode
Dec 31 17:00:30 commander: AutoSel Ethernet Port: Configured as LAN
Dec 31 17:00:30 O3G/hotplug: 3G modem VendorID=106c ProductID=3718
Dec 31 17:00:49 O3G/hotplug: check setting!!
Dec 31 17:00:51 O3G/hotplug: THIS IS EVDO MODEM CARD!!
Dec 31 17:01:03 O3G/auto_apn: Dial-up profile is manual
Dec 31 17:02:44 commander: START WANTYPE 3G
Dec 31 17:02:53 pppd[10859]: pppd 2.4.4 started by root, uid 0
Dec 31 17:02:53 chat[10887]: abort on (BUSY)
Dec 31 17:02:53 chat[10887]: abort on (NO CARRIER)
Dec 31 17:02:53 chat[10887]: abort on (ERROR)
Dec 31 17:02:53 chat[10887]: timeout set to 10 seconds
Dec 31 17:02:53 chat[10887]: send (AT^M)
Dec 31 17:02:53 chat[10887]: expect (OK)
Dec 31 17:02:53 chat[10887]: AT^M^M
Dec 31 17:02:53 chat[10887]: OK
Dec 31 17:02:53 chat[10887]:  -- got it
Dec 31 17:02:53 chat[10887]: send (AT+CGDCONT=1,"IP","vzwinternet"^M)
Dec 31 17:02:54 chat[10887]: expect (OK)
Dec 31 17:02:54 chat[10887]: ^M
Dec 31 17:02:54 chat[10887]: AT+CGDCONT=1,"IP","vzwinternet"^M^M
Dec 31 17:02:54 chat[10887]: ERROR
Dec 31 17:02:54 chat[10887]:  -- failed
Dec 31 17:02:54 chat[10887]: Failed (ERROR)
Dec 31 17:02:54 pppd[10859]: Connect script failed
Dec 31 17:02:54 pppd[10859]: Exit.
Logged

Hammer7

  • Level 1 Member
  • *
  • Posts: 7
Re: Cannot get Internet connection with UML290
« Reply #7 on: May 15, 2014, 09:42:29 PM »

It is working for me if I change the Dialed Number from #777 to *99***3#

CMDA2000/EV-DO, no username, no password, no APN

Hopefully this will help many people!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47208
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Cannot get Internet connection with UML290 (RESOLVED)
« Reply #8 on: May 16, 2014, 06:42:41 AM »

Glad you found the configuration and got it working.

Enjoy.
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!